EX-99.1 2 exh_991.htm EXHIBIT 99.1

Exhibit 99.1

 

 

 

 

 

DONLIN GOLD ANNOUNCES ASSAY RESULTS

FROM REMAINING 30 PERCENT OF THE 2020 DRILL PROGRAM, CONSISTENT WITH PREVIOUSLY REPORTED RESULTS OF HIGHER THAN PREDICTED GRADE-THICKNESS

 

STRONG OUTCOME CONFIRMS FOLLOW-UP DRILL PROGRAM PLANNED FOR 2021

 

March 25, 2021 – Anchorage, AK – Donlin Gold LLC (“Donlin Gold”), owned 50/50 by Barrick Gold Corporation (“Barrick”) (TSX: ABX) (NYSE: GOLD) and NOVAGOLD RESOURCES INC. (“NOVAGOLD”) (TSX, NYSE American: NG), is pleased to share the last set of assay results from the successful 2020 85-hole, 23,361-meter drill program.

 

Assay results for all 85 completed holes now reported, representing a final total of 23,361 meters drilled
Assay results demonstrate higher drilled grade-thickness than predicted by previous modelling
Data collected has resulted in an improved appreciation of the controls on mineralization
Drill program results will be integrated into the geologic model

 

The Board of Donlin Gold is considering additional confirmation and extension drilling to expand upon recent successes and fresh insights into the continuity and structural controls of the higher-grade mineralization.

 

Exceeding Expectations, Safely

 

The primary objective of the 2020 drill program, the largest such campaign at Donlin Gold since 2008, was to validate and increase the confidence in recent geologic modeling concepts.

 

Results in both the ACMA and Lewis deposit areas exceeded grade-thickness predicted by previous modeling, with higher grades observed over narrower intervals, particularly in sedimentary rocks.

 

Additional confirmation and extension drilling are being planned for the 2021 field season with a focus on further testing, orebody continuity, structural control, and geotechnical and geometallurgical data collection and analysis. The drilling program specifics will be finalized once all assay results have been integrated into an interim model update. It is anticipated that on the completion of the 2021 drilling program and a final geologic model update, the focus will then shift to updating the feasibility study subject to a formal decision by the Board.

 

Five of the top intervals received or updated since the January 19, 2021 media release include: 

 

DC20-1930 intersected 51.15 m grading 4.6 g/t gold, starting at 148.85 m drilled depth, including a sub interval of 7.60 m grading 12.4 g/t gold, starting at 182.40 m drilled depth; 
DC20-1932 intersected 47.66 m grading 4.8 g/t gold, starting at 101.62 m drilled depth, including a sub interval of 4.00 m grading 19.5 g/t gold, starting at 143.28 m drilled depth; 
DC20-1948 intersected 22.61 m grading 8.7 g/t gold, starting at 161.50 m drilled depth, including a sub interval of 10.08 m grading 15.5 g/t gold, starting at 167.50 m drilled depth;
DC20-1938 intersected 17.96 m grading 10.5 g/t gold, starting at 1.83 m drilled depth, including a sub interval of 3.96 m grading 28.0 g/t gold, starting at 1.83 m drilled depth; and
DC20-1946 intersected 35.80 m grading 4.5 g/t gold, starting at 96.20 m drilled depth.

 

  Page | 1

 

Drill hole collar locations and five of the top intervals since the January 19, 2021 release are shown in Figure 1

 

Drill hole orientations and depths and significant intervals are shown in Tables 1 and 2, respectively, in the Appendix at the end of this release.

 

These results were accomplished between March and October 2020 with zero COVID-19 cases on site and no Lost-Time Incidents.

 

Statements by the Owners

 

Barrick President and Chief Executive Mark Bristow said, “The highly successful and COVID-free conclusion of the 2020 drill program, and in particular the strong results Barrick and NOVAGOLD have been sharing over the past eight months, represent a major step forward in improving the geological confidence in the Donlin project, a necessary step to advancing Donlin up the value chain.” He extended his thanks to the Donlin Gold team.

 

Greg Lang, NOVAGOLD’s President and CEO, said, “On every level, the results of the largest drill program at Donlin Gold in 12 years have been incredibly rewarding for the partnership and all stakeholders. Since we released the initial results in August last year, the assays have consistently revealed higher-grade gold intersections. These have only served to elevate Donlin Gold’s confidence in the recent geologic modeling concepts developed by the Barrick and NOVAGOLD teams, while confirming multiple high-grade extensions in both the intrusive (igneous) and sedimentary rocks, including near surface. One such near surface hit in drill hole DC20-1938, revealed today in this final set of results, intersected 17.96 m grading 10.5 g/t gold including 3.96 m grading 28.0 g/t gold starting at 1.83 m drilled depth. Needless to say, the assay results from the 2020 drill program further strengthen our resolve and belief in the extraordinary nature of Donlin Gold and provide us with a wealth of new knowledge to integrate into an updated geologic model.”

 

Dan Graham, General Manager of the Donlin Gold JV added, “By far, our most important objective in 2020 was to protect the health and safety of our workforce, contractors, and the residents of the Yukon-Kuskokwim (Y-K) region. Despite the added challenge of navigating a pandemic, all 2020 drill program objectives were transcended and accomplished with zero COVID-19 cases on site and no Lost-Time Incidents. This is a testament to the professionalism and teamwork of all involved. It is an honor to work directly with our Alaska Native Corporation partners, Calista Corporation (“Calista”) and The Kuskokwim Corporation (“TKC”), as well as the communities in the Y-K region.  Thanks to the Donlin Gold team, as well as to Calista and TKC for their dedication to the highest standards of safety, social responsibility, and environmental stewardship. We are all proud to be bringing a federally permitted project up the value chain in one of the world’s most stable jurisdictions, the great State of Alaska, where there are numerous examples of socially and environmentally responsible mining projects, we as an industry can be proud of, and which can provide long-lasting benefits to future generations.”

 

About Donlin Gold

 

Donlin Gold LLC is an Alaska-based company owned equally by Barrick Gold U.S. Inc. and NovaGold Resources Alaska, Inc., which are wholly owned subsidiaries of Barrick and NOVAGOLD, respectively.

 

Donlin Gold is located in Alaska, the second largest gold-producing state in the U.S. With approximately 39 million ounces of gold grading 2.24 grams per tonne in the measured and indicated resource categories (100 percent basis)1, Donlin Gold hosts one of the largest and highest-grade undeveloped open-pit gold endowments in the world. The planned pits in which the existing resources are sited occupy only three kilometers of an eight-kilometer mineralized belt, which itself is located on less than 5% of Donlin Gold’s land position. Current activities at Donlin Gold are focused on the drill program, optimization efforts, community outreach, and advancing the remaining State permitting actions.

 

Donlin Gold is a committed partner to the Alaska Native Communities both surrounding the project and within the State as a whole. This commitment underpins our approach and is also reflected in the way in which the asset itself is structured. An important factor that distinguishes Donlin Gold from most other mining assets in Alaska is that the project is located on private land designated for mining activities five decades ago. Donlin Gold has entered into life-of-mine agreements with Calista, which owns the subsurface mineral rights, and TKC, a collection of 10 village corporations, which owns the surface land rights, and is committed to providing employment opportunities, scholarships, and preferential contract considerations to Calista and TKC shareholders. These agreements include a revenue-sharing structure, established by the Alaska Native Claims Settlement Act (ANSCA) of 1971, which resolved Alaska Native land claims, allotting 44 million acres of land for use by Alaska Native Corporations. Additionally, our long-term commitment to economic development is exemplified by Donlin Gold’s support of TKC’s initiative to launch energy and infrastructure projects in middle Kuskokwim villages. These partnerships, activities, and programs are illustrative of the commitment to the sustainable and responsible development of the Donlin Gold project for the benefit of all stakeholders.

 

 

_________________________

1 Donlin Gold data as per the Second Updated Feasibility Study (as defined below). Donlin Gold measured resources of approximately 8 Mt grading 2.52 g/t and indicated resources of approximately 534 Mt grading 2.24 g/t, each on a 100% basis, of which Barrick and NOVAGOLD each own 50%. Mineral resources have been estimated in accordance with National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”).

 

 

 

  Page | 2

 

FIGURE 1 Drill Hole Collar Locations

 

 

Depicted grid system is based on NAD83 UTM zone 4N coordinates.

 

The owners provided previous updates on assay results in the August 6, 2020 media release “Donlin Gold Project Provides Update on Recent Drilling and Ongoing Community Support in Alaska Amid COVID-19 Pandemic”, the October 26, 2020 media release “Donlin Gold 2020 Q3 Update: Drilling Continues to Yield High Grade Intercepts and Improve Geological Modeling”, and the January 19, 2021 media release “Donlin Gold 2020 Q4 Drilling Program Assay Results Continue to Exceed Modeled Projections While Partners Deliver a Safe and COVID-Free Year.” These previously disclosed results are referenced in Table 2 and marked with their disclosure date. 

 

  Page | 3

 

QA/QC Procedures

 

The QA/QC procedures for the 2020 Donlin Gold drill program and sampling protocol were developed and managed by Donlin Gold LLC and overseen by Barrick and NOVAGOLD. The chain of custody from the drill site to the sample preparation facility was continuously monitored. All samples are HQ-diameter core. Approximately 93% core recovery was achieved. Core was logged, cut, and sampled at site by Donlin Gold employees. Samples were primarily collected on two-meter lengths, with a minimum length of 0.3 meters and maximum length of approximately 3.5 meters. Sampled half-core was crushed and pulverized in ALS Limited’s Fairbanks, Alaska; Whitehorse, Yukon; or Vancouver, British Columbia sample preparation facilities. Pulp samples were sent to the ALS labs in Vancouver, British Columbia; Lima, Peru; or Reno, Nevada for gold assays and to labs in Vancouver, British Columbia or Lima, Peru for multi-element analysis. At least 14 quality control samples (four standards, four coarse blanks, two pulp blanks, two coarse duplicates, and two pulp duplicates) were inserted into each batch of 80 samples. The review of the quality control samples did not indicate any bias or error. There are no known factors that would materially affect the accuracy or reliability of the drill program data referred to in this media release.

 

Downhole directional surveys were completed on all reported completed holes by both Boart Longyear drill operators and on 96% of reported completed holes by DGI Geoscience Inc. technicians, and collar surveys were completed on all holes by Professional Licensed Surveyors from either Rowland Engineering Consultants or Brice Engineering LLC.

 

Each of ALS Limited, Boart Longyear, DGI Geoscience Inc., Rowland Engineering Consultants, and Brice Engineering LLC are independent of Donlin Gold, Barrick, and NOVAGOLD.

 

Scientific and Technical Information

 

Certain scientific and technical information contained herein with respect to the Donlin Gold project is derived from the “Donlin Creek Gold Project Alaska, USA NI 43-101 Technical Report on Second Updated Feasibility Study” prepared by AMEC with an effective date of November 18, 2011, as amended January 20, 2012 (the “Second Updated Feasibility Study”). Kirk Hanson, P.E., Technical Director, Open Pit Mining, North America, (AMEC, Reno) is the Qualified Person responsible for the preparation of the independent technical report, and an independent “qualified person” as defined by NI 43-101. Wood Canada Limited (“Wood” formerly AMEC Americas Limited) is currently updating all sections of the Second Updated Feasibility Study with updated costs, economic assessment, permitting information, and technical information related to permitting, generated on the Donlin Gold project since 2011, which is anticipated to be finalized and filed during 2021. Based on that cost review, Wood determined that updating the Second Updated Feasibility Study using 2020 costs and new gold price guidance results in no material change to the mineral resources or mineral reserves. The economic assessment in the updated study may be materially different than in the 2011 study.

 

Clifford Krall, P.E., who is the Mine Engineering Manager for NOVAGOLD and a “qualified person” under NI 43-101, has approved and verified the scientific and technical information related to the 2020 Donlin Gold drill program contained in this media release. To verify the information related to the drilling program, he visited the project site twice during the 2020 field season; discussed and observed logging, sampling, and sample shipping processes with responsible site staff; discussed and reviewed assay and QA/QC results with responsible personnel; and reviewed supporting documentation, including drill hole location and orientation and significant assay interval calculations.

 

Octavia Bath, P.Geo., who is a Barrick Project Manager and a “qualified person” under NI 43-101 has reviewed and approved the assay results for the Donlin Gold project contained in this media release.

 

 

Barrick Contacts:

Kathy du Plessis

Investor and Media Relations

+44 20 7557 7738

Email: barrick@dpapr.com

 

  Page | 4

 

Catherine Raw

COO, North America

Tel: +1 416-307-5157

 

www.barrick.com

 

 

 

NOVAGOLD Contacts:

 

Mélanie Hennessey
Vice President, Corporate Communications

Jason Mercier
Manager, Investor Relations

 

Tel: +1 604-669-6227 or 1-866-669-6227

www.novagold.com

 

 

Cautionary Note Regarding Forward-Looking Statements

 

This media release includes certain “forward-looking information” and “forward-looking statements” (collectively “forward-looking statements”) within the meaning of applicable securities legislation, including the United States Private Securities Litigation Reform Act of 1995. Forward-looking statements are frequently, but not always, identified by words such as “expects”, “anticipates”, “believes”, “intends”, “estimates”, “potential”, “possible”, and similar expressions, or statements that events, conditions, or results “will”, “may”, “could”, “would” or “should” occur or be achieved. Forward-looking statements are necessarily based on several opinions, estimates and assumptions that management of Barrick and NOVAGOLD considered appropriate and reasonable as of the date such statements are made, are subject to known and unknown risks, uncertainties, assumptions and other factors that may cause the actual results, activity, performance or achievements to be materially different from those expressed or implied by such forward-looking statements. All statements, other than statements of historical fact, included herein are forward-looking statements. These forward-looking statements include statements regarding anticipated benefits from the 2020 drill program including an improved geological model for Donlin Gold; the update to the Second Updated Feasibility Study and the results thereof, ongoing support provided to key stakeholders including Native Corporation partners; the potential impact of the COVID-19 pandemic on the development of Donlin Gold; the potential development and construction of Donlin Gold; the sufficiency of funds to continue to advance development of Donlin Gold; perceived merit of properties; mineral reserve and resource estimates; and future share price performance of Barrick and NOVAGOLD. In addition, any statements that refer to expectations, intentions, projections or other characterizations of future events or circumstances are forward-looking statements. Forward-looking statements are not historical facts but instead represent Barrick’s and NOVAGOLD’s management expectations, estimates and projections regarding future events or circumstances on the date the statements are made.

 

Important factors that could cause actual results to differ materially from expectations include the need to obtain additional permits and governmental approvals; the timing and likelihood of permits including the right-of-way lease offer for the project’s buried natural gas pipeline; the need for additional financing to explore and develop properties and availability of financing in the debt and capital markets; the outbreak of the coronavirus global pandemic (COVID-19); uncertainties involved in the interpretation of drill results and geological tests and the estimation of reserves and resources; changes in mineral production performance, exploitation and exploration successes; changes in national and local government legislation, taxation, controls or regulations and/or changes in the administration of laws, policies and practices, expropriation or nationalization of property and political or economic developments in the United States or Canada; the need for continued cooperation between Barrick and NOVAGOLD for the continued exploration, and development and eventual construction of the Donlin Gold property; the need for cooperation of government agencies and native groups in the development and operation of properties; risks of construction and mining projects such as accidents, equipment breakdowns, bad weather, disease pandemics, non-compliance with environmental and permit requirements, unanticipated variation in geological structures, ore grades or recovery rates; unexpected cost increases, which could include significant increases in estimated capital and operating costs; fluctuations in metal prices and currency exchange rates; whether a positive construction decision will be made regarding Donlin Gold; and other risks and uncertainties disclosed in Barrick’s most recent Form 40-F/Annual Information Form on file with the SEC and Canadian provincial securities regulatory authorities and NOVAGOLD’s most recent reports on Forms 10-K and 10-Q, particularly the "Risk Factors" sections of those reports and other documents filed by Barrick and NOVAGOLD with applicable securities regulatory authorities from time to time. Copies of these filings may be obtained by visiting Barrick’s and NOVAGOLD’s Investor Relations website at www.barrick.com and www.novagold.com, respectively, or the SEC's website at www.sec.gov, or at www.sedar.com. The forward-looking statements contained herein reflect the beliefs, opinions and projections of Barrick and NOVAGOLD on the date the statements are made. Barrick and NOVAGOLD assume no obligation to update the forward-looking statements of beliefs, opinions, projections, or other factors, should they change, except as required by law.

 

Cautionary Note to United States Investors

 

NOVAGOLD cautions that this media release has been prepared in accordance with the requirements of the securities laws in effect in Canada, which differ from the requirements of U.S. securities laws. Unless otherwise indicated, all resource and reserve estimates included in this media release have been prepared in accordance with Canadian National Instrument 43-101 Standards of Disclosure for Mineral Projects (“NI 43-101”) and the Canadian Institute of Mining, Metallurgy and Petroleum (CIM)—CIM Definition Standards on Mineral Resources and Mineral Reserves, adopted by the CIM Council, as amended (“CIM Definition Standards”). NI 43-101 is a rule developed by the Canadian Securities Administrators which establishes standards for all public disclosure an issuer makes of scientific and technical information concerning mineral projects. Canadian standards, including NI 43-101, differ significantly from the requirements of the United States Securities and Exchange Commission (SEC) Industry Guide 7 (“SEC Industry Guide 7”), and resource and reserve information contained herein may not be comparable to similar information disclosed by U.S. companies. NOVAGOLD’s disclosure concerning Reserve & Resources Estimates remains consistent with NI 43-101. Under SEC Industry Guide 7, mineralization may not be classified as a "reserve” unless the determination has been made that the mineralization could be economically and legally produced or extracted at the time the reserve determination is made. SEC Industry Guide 7 normally does not permit the inclusion of information concerning "measured mineral resources”, "indicated mineral resources” or "inferred mineral resources” or other descriptions of the amount of mineralization in mineral deposits that do not constitute "reserves” under SEC Industry Guide 7 in documents filed with the SEC. Investors should also understand that "inferred mineral resources” have a great amount of uncertainty as to their existence and great uncertainty as to their economic and legal feasibility. Under Canadian rules, estimated "inferred mineral resources” may not form the basis of feasibility or pre-feasibility studies except in rare cases. Disclosure of "contained ounces” in a resource is permitted disclosure under Canadian regulations; however, the SEC normally only permits issuers to report mineralization that does not constitute "reserves” under SEC Industry Guide 7 as in-place tonnage and grade without reference to unit measures. The requirements of NI 43-101 for identification of "reserves” are also not the same as those of SEC Industry Guide 7, and reserves reported by NOVAGOLD in compliance with NI 43-101 may not qualify as "reserves” under SEC Industry Guide 7. Donlin Gold does not have known reserves, as defined under SEC Industry Guide 7. Accordingly, information concerning mineral deposits set forth herein may not be comparable with information made public by companies that report in accordance with SEC Industry Guide 7.

 

  Page | 5

 

On October 31, 2018, the SEC adopted a final rule (“New Final Rule”) that will replace SEC Industry Guide 7 with new disclosure requirements that are more closely aligned with current industry and global regulatory practices and standards, including NI 43-101. Companies must comply with the New Final Rule for the Company’s first fiscal year beginning on or after January 1, 2021, which for NOVAGOLD would be the fiscal year beginning December 1, 2021. The New Final Rule provides that SEC Industry Guide 7 will remain effective until all registrants are required to comply with the New Final Rule, at which time SEC Industry Guide 7 will be rescinded. While early voluntary compliance with the New Final Rule is permitted, NOVAGOLD has not elected to comply with the New Final Rule at this time.

 

 

 

 

 

 

 

 

  Page | 6

 

APPENDIX

 

TABLE 1

Drill Hole Orientations* and Depths

 

Hole Azimuth (°) Inclination (°) Depth (m)
DC20-1865 237 79 227.0
DC20-1866 45 67 302.7
DC20-1867 28 73 217.5
DC20-1868 358 67 247.2
DC20-1869 330 72 175.9
DC20-1870 307 71 249.9
DC20-1871 303 63 458.4
DC20-1872 312 53 632.8
DC20-1873 250 49 274.9
DC20-1874 300 76 253.0
DC20-1875 304 53 218.5
DC20-1876 288 69 235.0
DC20-1877 303 73 249.9
DC20-1878 304 55 459.9
DC20-1879 302 58 231.0
DC20-1880 300 71 249.9
DC20-1881 301 52 256.0
DC20-1882 327 56 524.9
DC20-1883 308 54 266.4
DC20-1884 306 72 251.8
DC20-1885 278 63 296.6
DC20-1886 304 56 255.4
DC20-1887 305 60 255.4
DC20-1888 312 72 266.5
DC20-1889 328 56 406.6
DC20-1890 abandoned before completion, re-drilled as 1891
DC20-1891 331 55 377.3
DC20-1892 184 63 300.2
DC20-1893 312 75 260.9
DC20-1894 230 67 620.6
DC20-1895 329 53 362.1
DC20-1896

abandoned before completion, re-drilled as 1898

DC20-1897 325 59 335.0
DC20-1898 302 77 250.9
DC20-1899 358 63 201.0
DC20-1900 302 71 235.0
DC20-1901 306 65 464.8
DC20-1902 287 61 176.2
DC20-1903 259 64 150.7
DC20-1904 0 69 200.0

 

  Page | 7

 

Hole Azimuth (°) Inclination (°) Depth (m)
DC20-1905 290 58 212.5
DC20-1906 181 77 347.8
DC20-1907 305 63 431.6
DC20-1908 305 60 351.4
DC20-1909 5 75 239.3
DC20-1910 288 51 235.0
DC20-1911 1 78 150.3
DC20-1912 302 65 474.3
DC20-1913 296 63 224.9
DC20-1914 290 66 200.3
DC20-1915 309 67 325.5
DC20-1916 295 69 218.2
DC20-1917 50 65 175.3
DC20-1918 305 67 252.4
DC20-1919 272 57 249.0
DC20-1920 313 49 253.3
DC20-1921 235 54 607.2
DC20-1922 318 68 254.5
DC20-1923 301 69 211.5
DC20-1924 297 63 228.0
DC20-1925 290 54 210.0
DC20-1926 291 70 150.3
DC20-1927 296 68 299.9
DC20-1928 299 65 226.2
DC20-1929 289 58 214.9
DC20-1930 208 64 233.2
DC20-1931 295 65 152.7
DC20-1932 289 56 175.3
DC20-1933 295 59 200.0
DC20-1934 289 54 250.2
DC20-1935 282 69 150.0
DC20-1936 1 68 231.0
DC20-1937 256 68 531.9
DC20-1938 307 67 150.0
DC20-1939 171 79 151.8
DC20-1940 292 62 200.0
DC20-1941 104 85 175.0
DC20-1942 273 60 175.3
DC20-1943 326 78 215.5
DC20-1944 279 61 320.0
DC20-1945 305 77 283.8
DC20-1946 17 52 263.0
DC20-1947 304 76 240.2
DC20-1948 306 59 305.1

 

  Page | 8

 

Hole Azimuth (°) Inclination (°) Depth (m)
DC20-1949 326 56 303.6
DC20-1950 325 59 334.1
DC20-1951 6 73 178.8

 

* Note that azimuth and inclination values vary as each hole progresses. The stated values are hole averages, rounded to the nearest degree.

 

TABLE 2

2020 Donlin Gold Significant Assay Intervals

 

Hole ID Area

From

(Meters)

To

(Meters)

Length

(Meters)

Au Grade (g/t) Reported
DC20-1865 ACMA  136.75  149.16  12.41  4.91 8/6/2020
DC20-1865    155.50  174.21  18.71  2.03 8/6/2020
DC20-1865    200.22  213.57  13.35  2.97 8/6/2020
DC20-1865   TOTAL    44.47  3.12  
DC20-1866 ACMA  14.00  17.82  3.82  3.48 8/6/2020
DC20-1866    35.39  81.30  45.91  5.03 8/6/2020
including    63.35  75.30  11.95  10.44 8/6/2020
DC20-1866    98.25  103.42  5.17  7.01 8/6/2020
DC20-1866    108.30  131.66  23.36  4.15 8/6/2020
DC20-1866    208.44  221.61  13.17  4.69 8/6/2020
DC20-1866    226.53  256.81  30.28  4.20 8/6/2020
DC20-1866    266.00  276.76  10.76  4.72 8/6/2020
DC20-1866    281.33  285.57  4.24  1.83 8/6/2020
DC20-1866    291.00  296.86  5.86  5.61 8/6/2020
DC20-1866   TOTAL    142.57  4.61  
DC20-1867 ACMA  23.20  28.04  4.84  7.37 8/6/2020
DC20-1867    66.14  70.74  4.60  5.90 8/6/2020
DC20-1867    92.68  104.00  11.32  6.17 8/6/2020
DC20-1867   TOTAL    20.76  6.39  
DC20-1868 ACMA  115.51  125.74  10.23  4.13 8/6/2020
DC20-1868    243.48  247.19  3.71  1.92 8/6/2020
DC20-1868   TOTAL    13.94  3.54  
DC20-1869 ACMA  10.80  16.15  5.35  3.22 8/6/2020
DC20-1869    33.30  43.30  10.00  2.68 8/6/2020
DC20-1869    49.30  58.83  9.53  3.86 8/6/2020
DC20-1869    128.19  137.60  9.41  3.08 8/6/2020
DC20-1869   TOTAL    34.29  3.20  
DC20-1870 ACMA  156.66  164.60  7.94  4.24 8/6/2020
DC20-1870    173.10  180.80  7.70  7.53 8/6/2020
DC20-1870   TOTAL    15.64  5.86  
DC20-1871 ACMA  12.80  20.80  8.00  4.01 8/6/2020
DC20-1871    30.35  72.26  41.91  11.61 8/6/2020
including    38.24  42.24  4.00  17.00 8/6/2020
including    55.78  62.26  6.48  38.77 8/6/2020
DC20-1871    341.67  347.44  5.77  1.00 8/6/2020
DC20-1871   425.97  435.71 9.74 1.60 10/26/2020
DC20-1871   TOTAL    65.42  8.25  
DC20-1872 Lewis  47.30  73.46  26.16  3.40 10/26/2020
DC20-1872    82.80  86.60  3.80  4.74 10/26/2020
DC20-1872    163.82  167.70  3.88  4.39 8/6/2020

 

  Page | 9

 

Hole ID Area

From

(Meters)

To

(Meters)

Length

(Meters)

Au Grade (g/t) Reported
DC20-1872    290.62  294.58  3.96  3.17 8/6/2020
DC20-1872    544.34  555.00  10.66  1.80 10/26/2020
DC20-1872    603.23  609.23  6.00  2.33 10/26/2020
DC20-1872   TOTAL    54.46  3.11  
DC20-1873 Lewis  42.90  53.74  10.84  4.36 8/6/2020
DC20-1873    60.88  68.54  7.66  18.40 8/6/2020
including    63.16  68.54  5.38  25.26 8/6/2020
DC20-1873   TOTAL    18.50  10.17  
DC20-1874 ACMA  159.39  169.59  10.20  7.24 10/26/2020
DC20-1874    174.65  177.97  3.32  3.51 10/26/2020
DC20-1874    236.83  239.88  3.05  5.52 10/26/2020
DC20-1874   TOTAL   16.57 6.18  
DC20-1875 Lewis  18.75  22.64  3.89  1.50 10/26/2020
DC20-1875    43.17  47.09  3.92  1.95 10/26/2020
DC20-1875    100.06  105.68  5.62  6.09 10/26/2020
DC20-1875   TOTAL   13.43 3.55  
DC20-1876 ACMA  5.62  18.35  12.73  5.35 10/26/2020
DC20-1876   TOTAL   12.73 5.35  
DC20-1877 ACMA  123.48  127.65  4.17  80.58 10/26/2020
including    124.50 127.65 3.15 106.24 10/26/2020
DC20-1877   TOTAL   4.17 80.58  
DC20-1878 Lewis  27.47  34.05  6.58  2.83 10/26/2020
DC20-1878    48.86  68.63  19.77  11.34 10/26/2020
including    54.86  61.86  7.00  25.24 10/26/2020
DC20-1878    74.63  79.74  5.11  15.79 10/26/2020
including    74.63  77.74  3.11  21.10 10/26/2020
DC20-1878    96.92  105.70  8.78  1.23 10/26/2020
DC20-1878    120.32  124.31  3.99  1.83 10/26/2020
DC20-1878    132.14  135.94  3.80  1.21 10/26/2020
DC20-1878    140.90  154.70  13.80  3.10 10/26/2020
DC20-1878    175.34  186.70  11.36  2.00 10/26/2020
DC20-1878    198.40  240.70  42.30  2.03 10/26/2020
DC20-1878    244.75  247.92  3.17  4.27 10/26/2020
DC20-1878   TOTAL   118.66 4.31  
DC20-1879 Lewis  62.30  68.44  6.14  1.85 10/26/2020
DC20-1879    118.57  149.20  30.63  2.40 10/26/2020
DC20-1879   TOTAL   36.77 2.31  
DC20-1880 ACMA  40.70  44.80  4.10  10.67 10/26/2020
DC20-1880    136.30  139.80  3.50  10.23 10/26/2020
DC20-1880   TOTAL   7.60 10.47  
DC20-1881 ACMA  50.75  55.25  4.50  3.03 10/26/2020
DC20-1881   TOTAL   4.50 3.03  
DC20-1882 ACMA  5.00  9.00  4.00  4.52 10/26/2020
DC20-1882    15.00  21.00  6.00  6.54 10/26/2020
DC20-1882    27.00  43.00  16.00  2.81 10/26/2020
DC20-1882    67.00  71.00  4.00  1.51 10/26/2020
DC20-1882    113.11  121.27  8.16  4.28 10/26/2020
DC20-1882    160.18  167.55  7.37  2.11 10/26/2020
DC20-1882    200.80  219.63  18.83  1.75 10/26/2020
DC20-1882    233.97  245.15  11.18  4.73 10/26/2020
DC20-1882    251.03  255.03  4.00  3.90 10/26/2020

 

  Page | 10

 

Hole ID Area

From

(Meters)

To

(Meters)

Length

(Meters)

Au Grade (g/t) Reported
DC20-1882    302.03  328.53  26.50  2.24 10/26/2020
DC20-1882    336.49  349.54  13.05  2.32 10/26/2020
DC20-1882    392.24  402.03  9.79  2.99 10/26/2020
DC20-1882    TOTAL    128.88  2.94  
DC20-1883 Lewis  49.38  62.00  12.62  2.19 10/26/2020
DC20-1883    137.16  157.45  20.29  1.21 10/26/2020
DC20-1883    172.70  178.97  6.27  2.54 10/26/2020
DC20-1883    214.50  222.50  8.00  2.58 10/26/2020
DC20-1883    230.00  234.00  4.00  9.12 10/26/2020
DC20-1883    258.50  264.50  6.00  15.45 10/26/2020
DC20-1883    TOTAL    57.18  3.81  
DC20-1884 ACMA  142.50  152.25  9.75  5.07 10/26/2020
DC20-1884    163.25  167.10  3.85  2.17 10/26/2020
DC20-1884    TOTAL    13.60  4.25  
DC20-1885 ACMA  268.96  274.75  5.79  12.96 10/26/2020
including    268.96  272.87  3.91  16.11 10/26/2020
DC20-1885    TOTAL    5.79  12.96  
DC20-1886 Lewis  43.76  49.67  5.91  2.17 10/26/2020
DC20-1886    125.88  139.80  13.92  3.47 10/26/2020
DC20-1886    147.00  151.00  4.00  3.95 10/26/2020
DC20-1886    158.78  180.90  22.12  4.65 10/26/2020
including    172.90  176.90  4.00  12.30 10/26/2020
DC20-1886    196.80  212.20  15.40  3.37 10/26/2020
DC20-1886    218.20  252.08  33.88  6.52 10/26/2020
including    224.20  232.14  7.94  11.27 10/26/2020
DC20-1886    TOTAL    95.23  4.75  
DC20-1887 Lewis  5.10  10.50  5.40  1.78 10/26/2020
DC20-1887    132.00  145.50  13.50  4.32 10/26/2020
including    134.00  138.00  4.00  10.02 10/26/2020
DC20-1887    150.45  160.00  9.55  4.65 10/26/2020
DC20-1887    177.38  185.00  7.62  1.65 10/26/2020
DC20-1887    212.50  218.50  6.00  1.73 10/26/2020
DC20-1887    TOTAL    42.07  3.22  
DC20-1888 ACMA  178.58  185.51  6.93  43.12 10/26/2020
including    180.26  183.51  3.25  90.49 10/26/2020
DC20-1888    191.45  203.33  11.88  1.77 10/26/2020
DC20-1888    TOTAL    18.81  17.00  
DC20-1889 ACMA  33.00  43.00  10.00  5.95 1/19/2021
including    35.00  39.00  4.00  11.15 1/19/2021
DC20-1889    56.00  60.00  4.00  1.38 1/19/2021
DC20-1889    115.00  120.00  5.00  24.27 1/19/2021
including    115.50  118.50  3.00  32.77 1/19/2021
DC20-1889    176.00  188.00  12.00  2.77 1/19/2021
DC20-1889    205.50  218.50  13.00  2.68 1/19/2021
DC20-1889    281.00  306.20  25.20  2.13 1/19/2021
DC20-1889    348.00  353.00  5.00  7.62 1/19/2021
DC20-1889    TOTAL    74.20  4.67  
DC20-1891 ACMA  8.08  15.39  7.31  1.65 10/26/2020
DC20-1891    52.99  76.37  23.38  2.58 10/26/2020
DC20-1891    107.69  121.70  14.01  2.20 10/26/2020

 

  Page | 11

 

Hole ID Area

From

(Meters)

To

(Meters)

Length

(Meters)

Au Grade (g/t) Reported
DC20-1891    212.43  222.39  9.96  1.66 1/19/2021
DC20-1891    228.35  248.63  20.28  3.32 1/19/2021
DC20-1891    262.48  291.66  29.18  3.10 1/19/2021
DC20-1891    331.37  335.37  4.00  2.33 1/19/2021
DC20-1891    TOTAL    108.12  2.65  
DC20-1892 ACMA  52.51  74.19  21.68  2.39 1/19/2021
DC20-1892    92.16  95.87  3.71  4.18 1/19/2021
DC20-1892    148.00  156.00  8.00  4.12 1/19/2021
DC20-1892    184.96  188.48  3.52  1.04 1/19/2021
DC20-1892    247.50  257.46  9.96  1.75 1/19/2021
DC20-1892    TOTAL    46.87  2.59  
DC20-1893 ACMA  139.70  143.70  4.00  1.35 1/19/2021
DC20-1893    223.80  230.50  6.70  1.87 1/19/2021
DC20-1893    247.43  253.80  6.37  1.62 1/19/2021
DC20-1893    TOTAL    17.07  1.65  
DC20-1894 ACMA  26.60  32.60  6.00  3.84 1/19/2021
DC20-1894    132.40  136.40  4.00  3.38 1/19/2021
DC20-1894    152.40  158.40  6.00  3.68 1/19/2021
DC20-1894    244.20  253.80  9.60  1.00 1/19/2021
DC20-1894    259.00  263.00  4.00  9.22 1/19/2021
DC20-1894    274.50  284.00  9.50  5.48 1/19/2021
DC20-1894    290.00  294.00  4.00  3.83 1/19/2021
DC20-1894    345.00  348.00  3.00  4.88 1/19/2021
DC20-1894    421.50  429.50  8.00  2.08 1/19/2021
DC20-1894    508.00  521.63  13.63  4.45 1/19/2021
DC20-1894    558.93  580.27  21.34  3.65 1/19/2021
DC20-1894    586.06  605.33  19.27  2.31 1/19/2021
DC20-1894    TOTAL    108.34  3.57  
DC20-1895 ACMA  20.43  26.40  5.97  4.13 1/19/2021
DC20-1895    169.30  193.80  24.50  5.33  
DC20-1895    218.28  242.08  23.80  6.54 1/19/2021
including    220.28  227.40  7.12  12.71 1/19/2021
DC20-1895    257.63  267.00  9.37  1.62 1/19/2021
DC20-1895    286.85  289.93  3.08  3.66 1/19/2021
DC20-1895    TOTAL    66.72  5.06  
DC20-1897 ACMA  17.74  28.95  11.21  2.20 1/19/2021
DC20-1897    145.10  153.04  7.94  1.62 1/19/2021
DC20-1897    219.04  225.04  6.00  2.69 1/19/2021
DC20-1897    243.58  258.12  14.54  4.79 1/19/2021
DC20-1897    287.70  295.70  8.00  2.62 1/19/2021
DC20-1897    321.98  325.97  3.99  8.81 1/19/2021
DC20-1897    TOTAL    51.68  3.47  
DC20-1898 ACMA  222.04  231.93  9.89  4.11 1/19/2021
DC20-1898    TOTAL    9.89  4.11  
DC20-1899 ACMA  72.73  88.87  16.14  7.78 1/19/2021
including    72.73  76.70  3.97  13.91 1/19/2021
DC20-1899    TOTAL    16.14  7.78  
DC20-1900 Lewis  90.12  94.00  3.88  2.83 1/19/2021
DC20-1900    107.20  119.30  12.10  2.37 1/19/2021
DC20-1900    140.20  150.00  9.80  4.78 1/19/2021

 

  Page | 12

 

Hole ID Area

From

(Meters)

To

(Meters)

Length

(Meters)

Au Grade (g/t) Reported
DC20-1900    164.00  184.00  20.00  2.74 1/19/2021
DC20-1900    199.00  209.00  10.00  5.61 1/19/2021
DC20-1900    TOTAL    55.78  3.54  
DC20-1901 Lewis  73.66  85.15  11.49  1.16 1/19/2021
DC20-1901    218.78  222.46  3.68  3.65 1/19/2021
DC20-1901    233.97  237.50  3.53  3.43 1/19/2021
DC20-1901    302.16  306.16  4.00  3.50 1/19/2021
DC20-1901    358.00  390.00  32.00  2.40 1/19/2021
DC20-1901    TOTAL    54.70  2.37  
DC20-1902 Lewis  18.00  33.30  15.30  1.23 1/19/2021
DC20-1902    96.00  103.54  7.54  4.65 1/19/2021
DC20-1902    153.00  159.27  6.27  1.79 1/19/2021
DC20-1902    TOTAL    29.11  2.24  
DC20-1903 ACMA  99.39  107.53  8.14  45.26 1/19/2021
including    99.39  106.23  6.84  52.14 1/19/2021
DC20-1903    112.79  119.76  6.97  2.57 1/19/2021
DC20-1903    TOTAL    15.11  25.57  
DC20-1904 ACMA  61.77  97.65  35.88  3.71 1/19/2021
DC20-1904    103.54  109.42  5.88  4.94 1/19/2021
DC20-1904    TOTAL    41.76  3.88  
DC20-1905 Lewis  41.65  45.05  3.40  4.50 1/19/2021
DC20-1905    51.00  67.00  16.00  2.45 1/19/2021
DC20-1905    81.00  89.00  8.00  1.39 1/19/2021
DC20-1905    TOTAL    27.40  2.40  
DC20-1906 ACMA  225.73  237.98  12.25  6.27 1/19/2021
DC20-1906    TOTAL    12.25  6.27  
DC20-1907 Lewis  248.54  254.46  5.92  1.48 1/19/2021
DC20-1907    367.08  385.96  18.88  5.60 1/19/2021
including    368.95  372.75  3.80  16.09 1/19/2021
DC20-1907    395.45  403.24  7.79  1.64 1/19/2021
DC20-1907    418.58  428.45  9.87  3.27 1/19/2021
DC20-1907    TOTAL    42.46  3.76  
DC20-1908 Lewis  112.25  122.25  10.00  2.40 1/19/2021
DC20-1908    TOTAL    10.00  2.40  
DC20-1909 ACMA  74.22  79.40  5.18  8.04 1/19/2021
DC20-1909    94.50  98.40  3.90  3.17 1/19/2021
DC20-1909    135.50  145.60  10.10  2.31 1/19/2021
DC20-1909   189.00 193.00 4.00 3.33  
DC20-1909    TOTAL   23.18  3.91  
DC20-1910 Lewis  162.43  166.43  4.00  6.54 1/19/2021
DC20-1910    184.23  193.23  9.00  7.88 1/19/2021
DC20-1910    201.23  209.23  8.00  7.28 1/19/2021
DC20-1910    TOTAL    21.00  7.40  
DC20-1911 ACMA  61.00  83.00  22.00  2.29 1/19/2021
DC20-1911    105.00  113.00  8.00  2.68 1/19/2021
DC20-1911    TOTAL    30.00  2.40  
DC20-1912 Lewis  178.80  198.80  20.00  4.11 1/19/2021
DC20-1912    249.70  287.00  37.30  7.00 1/19/2021
including    251.70  255.00  3.30  24.55 1/19/2021
DC20-1912    341.00  373.60  32.60  1.70  

 

  Page | 13

 

Hole ID Area

From

(Meters)

To

(Meters)

Length

(Meters)

Au Grade (g/t) Reported
DC20-1912    405.60  414.50  8.90  2.47  
DC20-1912    423.60  431.60  8.00  1.38  
DC20-1912    TOTAL   106.80  4.04  
DC20-1913 Lewis  15.00  19.00  4.00  4.87 1/19/2021
DC20-1913    118.53  148.00  29.47 2.25  
DC20-1913    TOTAL    33.47  2.56  
DC20-1914 ACMA  18.44  28.44  10.00  1.92 1/19/2021
DC20-1914    91.13  104.02  12.89  1.31 1/19/2021
DC20-1914    112.88  116.88  4.00  1.05 1/19/2021
DC20-1914    TOTAL    26.89  1.49  
DC20-1915 Lewis  31.90  37.55  5.65  1.08 1/19/2021
DC20-1915    228.10  234.10  6.00  1.78 1/19/2021
DC20-1915    287.42  302.78  15.36  7.22 1/19/2021
including    298.78  302.78  4.00  21.03 1/19/2021
DC20-1915    316.76  324.76  8.00  2.16 1/19/2021
DC20-1915    TOTAL    35.01  4.14  
DC20-1916 Lewis  19.94  31.88  11.94  4.87 1/19/2021
DC20-1916    49.90  58.86  8.96  5.32 1/19/2021
DC20-1916    136.18  148.16  11.98  1.32 1/19/2021
DC20-1916   201.59 211.58 9.99 1.57 1/19/2021
DC20-1916    TOTAL   42.87 3.20  
DC20-1917 ACMA  145.56  157.35  11.79  1.51  
DC20-1917    TOTAL   11.79 1.51  
DC20-1918 Lewis  154.20  162.20  8.00  3.07  
DC20-1918    194.16  199.53  5.37  1.59  
DC20-1918    TOTAL    13.37  2.48  
DC20-1919 ACMA  77.25  89.25  12.00  1.55  
DC20-1919    147.15  171.15  24.00  1.55  
DC20-1919    189.25  197.25  8.00  1.87  
DC20-1919    235.30  246.43  11.13  3.36  
DC20-1919    TOTAL    55.13  1.96  
DC20-1920 Lewis  6.03  10.67  4.64  4.10 1/19/2021
DC20-1920    138.61  144.00  5.39  1.48  
DC20-1920    151.00  162.19  11.19  1.86  
DC20-1920    192.26  199.80  7.54  3.56  
DC20-1920    TOTAL    28.76 2.60  
DC20-1921 ACMA 19.80  23.80  4.00  3.91  
DC20-1921    98.86  103.98  5.12  2.11 1/19/2021
DC20-1921    109.98  116.97  6.99  5.48 1/19/2021
DC20-1921    133.56  142.67  9.11  1.69 1/19/2021
DC20-1921    165.67  189.40  23.73  2.64 1/19/2021
DC20-1921    206.23  209.74  3.51  5.18 1/19/2021
DC20-1921    284.64  292.98  8.34  4.99 1/19/2021
DC20-1921    297.12  311.16  14.04  3.27 1/19/2021
DC20-1921    320.31  323.75  3.44  12.13  
DC20-1921    339.27  349.27  10.00  2.36  
DC20-1921    355.27  361.66  6.39  11.17  
including    355.27  360.94  5.67  11.50  
DC20-1921    371.47  402.18  30.71  3.78  
DC20-1921    413.94  426.58  12.64  5.27  
DC20-1921    433.03  449.99  16.96  4.10  

 

  Page | 14

 

Hole ID Area

From

(Meters)

To

(Meters)

Length

(Meters)

Au Grade (g/t) Reported
DC20-1921    496.23  506.40  10.17  5.42  
DC20-1921    TOTAL    165.15 4.19  
DC20-1922 Lewis  134.00  139.77  5.77  3.00  
DC20-1922    TOTAL    5.77  3.00  
DC20-1923 Lewis 62.88 69.28 6.40 7.02  
DC20-1923    85.60  91.55  5.95  1.68 1/19/2021
DC20-1923    128.00  131.62  3.62  3.79 1/19/2021
DC20-1923   196.29 200.10 3.81 2.42  
DC20-1923    TOTAL    19.78 3.94  
DC20-1924 Lewis  40.25  46.25  6.00  1.80  
DC20-1924    113.08  125.57  12.49  2.50  
DC20-1924    132.25  139.25  7.00  6.54  
DC20-1924    TOTAL    25.49  3.44  
DC20-1925 Lewis  160.60  164.60  4.00  1.06  
DC20-1925    TOTAL    4.00  1.06  
DC20-1926 Lewis  21.96  35.96  14.00  4.36 1/19/2021
DC20-1926    TOTAL    14.00  4.36  
DC20-1929 Lewis  135.00  145.50  10.50  2.34  
DC20-1929    154.75  160.50  5.75  1.12  
DC20-1929    TOTAL    16.25  1.91  
DC20-1930 ACMA  102.30  110.30  8.00  2.62 1/19/2021
DC20-1930    119.50  137.50  18.00  3.14 1/19/2021
DC20-1930    148.85  200.00  51.15  4.65  
including    182.40  190.00 7.60  12.39  
DC20-1930    208.00 218.00 10.00 1.25  
DC20-1930    TOTAL   87.15  3.76  
DC20-1932 Lewis  91.62  95.62  4.00  3.24  
DC20-1932    101.62  149.28  47.66  4.76  
including    143.28  147.28  4.00  19.53  
DC20-1932    TOTAL    51.66  4.65  
DC20-1934 Lewis  128.66  132.66  4.00  4.51  
DC20-1934    166.66  174.66  8.00  2.68  
DC20-1934    TOTAL    12.00  3.29  
DC20-1935 Lewis  37.75  41.10  3.35  2.56  
DC20-1935    TOTAL    3.35  2.56  
DC20-1936 Lewis  181.48  198.31  16.83  2.27  
DC20-1936    TOTAL    16.83  2.27  
DC20-1937 ACMA  158.35  162.16  3.81  5.72  
DC20-1937    173.96  177.96  4.00  2.84  
DC20-1937    185.96  195.60  9.64  1.80  
DC20-1937    243.26  285.23  41.97  1.40  
DC20-1937    291.23  295.23  4.00  6.35  
DC20-1937    301.23  325.45  24.22  3.04  
DC20-1937    335.36  341.36  6.00  6.79 1/19/2021
DC20-1937    349.30  365.63  16.33  3.20 1/19/2021
DC20-1937    390.19  494.07  103.88  6.14 1/19/2021
including    459.17  481.32  22.15  12.55 1/19/2021
DC20-1937    500.10  526.63  26.53  2.40 1/19/2021
DC20-1937    TOTAL   240.38  4.17  
DC20-1938 Lewis  1.83  19.79  17.96  10.47  
including    1.83  5.79  3.96  28.02  

 

  Page | 15

 

Hole ID Area

From

(Meters)

To

(Meters)

Length

(Meters)

Au Grade (g/t) Reported
DC20-1938    53.58  61.20  7.62  2.99  
DC20-1938    TOTAL    25.58  8.24  
DC20-1940 Lewis  18.08  24.00  5.92  1.58  
DC20-1940    123.00  152.55  29.55  4.64  
including    124.85  132.30  7.45  12.19  
DC20-1940    158.50  164.50  6.00  5.57  
DC20-1940    TOTAL    41.47  4.34  
DC20-1941 ACMA  5.49  14.63  9.14  1.25  
DC20-1941    90.38  125.75  35.37  3.40  
DC20-1941    TOTAL    44.51  2.96  
DC20-1942 Lewis  15.50  19.50  4.00  4.19  
DC20-1942    53.50  73.00  19.50  7.10  
including    53.50  59.90  6.40  13.26  
DC20-1942    122.75  125.75  3.00  5.17  
DC20-1942    TOTAL    26.50  6.45  
DC20-1944 ACMA  27.73  31.73  4.00  3.57  
DC20-1944    205.38  209.00  3.62  5.45 1/19/2021
DC20-1944    227.00  232.00  5.00  1.55 1/19/2021
DC20-1944    237.62  249.22  11.60  3.59 1/19/2021
DC20-1944   274.00 277.55 3.55 8.49 1/19/2021
DC20-1944   286.17 294.00 7.83 6.12 1/19/2021
DC20-1944    TOTAL    35.60 4.53  
DC20-1945 ACMA  95.86  124.70  28.84  1.58  
DC20-1945    145.70  153.35  7.65  1.65  
DC20-1945    246.75  258.92  12.17  4.60  
DC20-1945    TOTAL    48.66  2.34  
DC20-1946 ACMA  26.00  44.30  18.30  2.08  
DC20-1946    50.25  60.25  10.00  3.36  
DC20-1946    72.25  84.25  12.00  4.17  
DC20-1946    96.20  132.00  35.80  4.55  
DC20-1946    183.00  188.60  5.60  5.82  
DC20-1946    TOTAL    81.70  3.88  
DC20-1947 ACMA 73.81 80.10 6.29 3.20 1/19/2021
DC20-1947    TOTAL   6.29 3.20  
DC20-1948 ACMA  151.98  155.50  3.52  10.12  
DC20-1948    161.50  184.11  22.61  8.66  
including    167.50  177.58  10.08  15.47  
DC20-1948    TOTAL    26.13  8.86  
DC20-1949 ACMA  28.84  32.56  3.72  2.28 1/19/2021
DC20-1949    64.93  70.44  5.51  3.30 1/19/2021
DC20-1949    96.01  100.58  4.57  2.17 1/19/2021
DC20-1949    141.35  156.70  15.35  5.37 1/19/2021
DC20-1949   212.45 222.82 10.37 1.13  
DC20-1949   248.25 258.90 10.65 4.14  
DC20-1949   285.90 289.06 3.16 4.53  
DC20-1949    TOTAL   53.33 3.55  
DC20-1950 ACMA  18.60  30.60  12.00  3.03  
DC20-1950    80.40  85.40  5.00  1.99  
DC20-1950    161.50  175.50  14.00  2.63 1/19/2021
DC20-1950    180.80  193.05  12.25  3.14 1/19/2021
DC20-1950    230.30  237.50  7.20  5.91 1/19/2021

 

  Page | 16

 

Hole ID Area

From

(Meters)

To

(Meters)

Length

(Meters)

Au Grade (g/t) Reported
DC20-1950    250.00  262.50  12.50  3.49 1/19/2021
DC20-1950    272.00  277.38  5.38  2.24 1/19/2021
DC20-1950    295.15  302.00  6.85  5.17 1/19/2021
DC20-1950    307.00  320.50  13.50  3.60  
DC20-1950    TOTAL    88.68  3.43  
DC20-1951 ACMA 2.90 11.30 8.40 3.03  
DC20-1951   109.96 123.88 13.92 2.34 1/19/2021
DC20-1951    TOTAL   22.32 2.60  

 

 

Significant intervals represent drilled intervals and not necessarily true thickness of mineralization. Mineralized intervals meet or exceed 3 meters in length above 1 g/t. A maximum of 4 meters of continuous dilution (< 1 g/t) is permitted. Any drill intervals not depicted in this table did not meet the significant interval criteria.

 

 

 

Page | 17