SALONA GLOBAL MEDICAL DEVICE CORPORATION AND SUBSIDIARIES

TABLE OF CONTENTS

1

As used in this Annual Report on Form 10-K, the terms "we," "us," "our," the "Company" and "Salona" mean Salona Global Medical Device Corporation and its subsidiaries (unless the context indicates a different meaning).

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This annual report, including, without limitation, statements under the heading "Management's Discussion and Analysis of Financial Condition and Results of Operations," includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended ("Securities Act") and Section 21E of the Securities Exchange Act of 1934, as amended ("Exchange Act").  These forward-looking statements can be identified by the use of forward-looking terminology, including the words "believes," "estimates," "anticipates," "expects," "intends," "plans," "may," "will," "potential," "projects," "predicts," "continue," or "should," "could", "may", "might" "will" and "would" or, in each case, their negative or other variations or comparable terminology.  There can be no assurance that actual results will not materially differ from expectations.  Such statements include, but are not limited to, any statements relating to the future effects of the COVID 19 pandemic, the general expansion of our business, and other statements which are not statements of current or historical facts.

The forward-looking statements contained in this annual report are based on our current expectations and beliefs concerning future developments and their potential effects on us.  Future developments affecting us may not be those that we have anticipated.  These forward-looking statements involve a number of risks, uncertainties (some of which are beyond our control) and other assumptions that may cause actual results or performance to be materially different from those expressed or implied by these forward-looking statements.  These risks and uncertainties include, but are not limited to, those factors described under the heading "Risk Factors." Should one or more of these risks or uncertainties materialize, or should any of our assumptions prove incorrect, actual results may vary in material respects from those projected in these forward-looking statements.  We caution readers not to place undue reliance on any forward-looking statements, which speak only as of the dates on which they are made.  We undertake no obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as may be required under applicable securities laws.  These risks and others described under "Risk Factors" may not be exhaustive.

By their nature, forward-looking statements involve risks and uncertainties because they relate to events and depend on circumstances that may or may not occur in the future.  We caution you that forward-looking statements are not guarantees of future performance and that our actual results of operations, financial condition and liquidity, and developments in the industry in which we operate may differ materially from those made in or suggested by the forward-looking statements contained in this annual report.  In addition, even if our results or operations, financial condition and liquidity, and developments in the industry in which we operate are consistent with the forward-looking statements contained in this annual report, those results or developments may not be indicative of results or developments in subsequent periods.

ITEM 1. BUSINESS

COMPANY OVERVIEW

We are an acquisition-oriented, U.S.-based medical device holding company operating through several wholly owned U.S. subsidiaries.  In May 2021 and September 2021, respectively, we acquired our subsidiaries South Dakota Partners, Inc., a South Dakota corporation ("SDP"), and Simbex, LLC, a New Hampshire limited liability company ("Simbex") and in November 2021 we formed a new subsidiary, ALG Health Plus, LLC, a Delaware limited liability company ("ALG Health Plus"), as a result of which we became engaged in the production and sale of medical devices and products, certain of which are proprietary and white label.  Our products include devices used for pain management, cold and hot therapy, NMES, PEMF and ultrasound as well as wearable technology and products used to enhance physical stability.

We intend to achieve scale through further acquisitions and organic growth. We place an emphasis on products for people over the age of sixty-five, which demographic provides steady demand by virtue of government sponsored medical coverage in the U.S. Our current operations are focused predominantly in the business of recovery science, technologies that help individuals prevent and recover from surgery and disease. We expect to continue to expand our business in recovery science as we continue to explore acquisitions within and adjacent to this business vertical.

Our common shares trade on the TSXV under the symbol "SGMD." Our registered office is Suite 200E - 1515A Bayview Avenue, East York, Ontario and our headquarters are located at 3330 Caminito Daniella, Del Mar, California, 92014.

Unless otherwise noted, all figures in this report are reported in Canadian Dollars.

Plan of Operations

Our primary objective is to become a leading supplier, producer and developer of medical device products ‎through both organic growth and through acquisitions.

Growth Plan

We anticipate that our acquisition-oriented growth strategy will leverage the Canadian capital markets to target smaller U.S.-based private medical device companies by offering stock and cash to acquire such companies and ‎integrate them into a large, broad-based medical device company.‎  Through this growth strategy, we intend to increase our overall revenue and profits and therefore earnings per share by (a) ‎increasing revenues through international distribution by seeking to leverage management's existing sales distribution networks in ‎Europe, Australia and other markets to increase sales for each acquired company; (b) increasing our product lines ‎by developing, in-licensing or acquiring new intellectual property protected devices synergistic with the acquisitions; and (c) ‎increasing profits through operational integration in an effort to reduce supply chain risks and increase cash flow and margin‎.

Acquisition Pipeline

Subsequent to our fiscal year ended February 28, 2022, in March 2022, we acquired Mio-Guard, LLC, a Michigan limited liability company ("Mio-Guard") which is engaged in medical device sales and marketing serving the Midwest United States, through a merger with our wholly owned subsidiary.  Mio-Guard and its predecessors had 2021 unaudited annual revenues of approximately $4.5M (US $3.6M) with 25% gross margins.  Since 2009, the team at Mio-Guard has sold into the athletic training, physical therapy and orthopedics markets for sports medicine products. Mio-Guard has over fifty sales representatives in the United States with a focus on the Midwest, South and Central United States and long-standing relationships with institutions ranging from high school to college to professional athletics. Additionally, our management team has a pipeline of small, privately held, stand-alone and bolt-on medical device companies targeted for acquisition in the highly fragmented global market for injury, surgical prevention, rehabilitation and recovery for the aging population throughout the continuum of care, which fall into one of three primary categories:

• Private smaller medical device companies struggling with sufficient capitalization and operational expertise to fully realize the value of their intellectual property;

• Niche players that succeed in developing a handful of quality products often turn to larger listed companies that do not allow ownership to participate in the upside of including their device in a larger company; and

• Smaller U.S.-listed companies that lack liquidity and coverage to offer sufficient upside to vendors.

We believe we are well positioned to offer acquisition targets upside through stock/cash acquisitions with a liquid TSXV listing.

We intend to acquire any identified medical device targets using a structure similar to our acquisition of SDP, Simbex, ALG and Mio-Guard.  It is intended that potential targets would primarily or solely receive Company equity as consideration for the potential acquisition rather than cash, which would reduce our requirement for additional capital. Additionally, to date, discussions are most advanced with targets that are operationally cash flow positive, which may enhance our ability to borrow for additional capital needs.

Milestones

We expect to use our available working capital to finance identified and complementary acquisitions, and for general working capital. Our immediate short-term objectives will be to evaluate and acquire additional complementary medical device companies to expand our distribution networks and product lines.

Our long-term objectives will be to:

• leverage sales distribution networks to expand our distribution channels;

• increase our product lines by developing, in-licensing or acquiring new intellectual property protected devices synergistic with the identified acquisitions; and

• increase profits through operational integration in an effort to reduce supply chain risks and increase cash flow and margin.

OUR OPERATIONS

South Dakota Partners, Inc.

Overview

Based in Clear Lake, South Dakota (the "Clear Lake Facility"), our subsidiary, South Dakota Partners, Inc. ("SDP") is a packager, producer and seller of private white-label medical devices in the United States, primarily focusing on devices for pain management, cold and hot therapy, TENS, NMES, PEMF and ultrasound therapy.‎ The United States represents roughly 40% of the global medical device market (SelectUSA: Medical Technology Spotlight: The Medical Technology Industry in the United States) with organic growth opportunities by virtue of a growing aging population. Recent threats of disruption in international trade markets, whether from trade disputes, pandemic or geopolitical factors, have made some companies seek to diversify sources of supply to include firms with operations in the United States, presenting another opportunity for organic growth.  The United States is a heavily regulated market, and as a result, medical device businesses that operate in the United States require expertise in the fields of compliance, production, product design, packaging, marketing and more. SDP's overall strategic plan has been to position itself as a respected, reliable, and successful partner offering production, packaging, marketing and other ancillary services within the medical device industry. 

Products

Production Line of Services: The majority of SDP's revenue is derived from services related to production, production planning, shipping, and packaging and servicing products. SDP offers an end-to-end solution for the supply chain within the medical device industry. SDP not only assists in the development of medical device products but also provides the layout and design of the entire production process of a device, from sourcing to final fulfillment, which requires expertise from engineers of many different disciplines, compliance experts, and technical experts. This process often includes the production of specialized automated robotic systems for use in reducing cost and increasing efficiency and fidelity of the process. A typical onboarding starts with the outlining of customer expectations, current projected annual volumes, and order frequency. Once this information is assessed, SDP works with the customer to establish the resources required for design transfer, new infrastructure needs (if any), new equipment needs (if any) and supply chain details, and to evaluate potential risks. Once the logistical concerns have been assessed and considered, SDP commences a technical data review, during which it reviews the technical documentation provided by the customer to assess for accuracy, develops a full product specification and production plan, develops a product traceability and recall plan and ensures compliance with ‎relevant regulatory and labeling requirements, to the extent they are already in place. Following completion of its technical review, SDP's production engineering and quality engineering teams commence the process of establishing new supply chains, production ‎cells, protocols and begin the prototypic phase, if necessary. Once the initial phases are complete, SDP enters the production readiness phase to verify standard operating procedure (SOP) sufficiency and pilot procedures to ensure production meets necessary quality standards. Finally, SDP's production team will then commence process validation to train employees, prepare relevant procedures, and troubleshoot issues discovered in pilot production runs before undertaking the full production process of a device.

Service & Sales Product Line: The process of servicing equipment and providing customer assistance is one that is often labor intensive and requires expertise, particularly when working with complex and sensitive technologies. Many medical device companies prefer to have these services offered by the very same experts who design and produce the devices. SDP offers repairs on damaged or malfunctioning products as well as the ability to interface and troubleshoot devices and answer questions from potential customers‎, the device end users. SDP only offers these services to end users of the devices produced by SDP. SDP offers these services to both domestic and international customers.

Fulfillment Service Line: Many medical device designers or producers lack the expertise, capacity, and bandwidth to contend with a growing and deeply fragmented customer base. SDP offers management of the interface with customers down to final fulfillment and tracking. Once production is complete, SDP will store products for existing customers that it has already sold to them in order to maintain, track and ultimately deliver finished goods directly to end users. What seems on its face to be a simple process, becomes increasingly difficult as the number of product variants increases and the number of outgoing deliveries increases into the hundreds or thousands.

SDP's product line is designed to remove all but the development of intellectual property and sales channels from the purview of its customers. SDP's goal is to reduce the complexity and burdens of medical device operations of its customers once the technology has been developed by reducing cost, streamlining operations, managing quality to six sigma standards, and managing the end user interface. SDP believes that it is the only U.S. domestic company to offer such a wide and focused scope of services ‎and products to its clients. Within ‎the medical device market in which SDP operates, SDP focuses upon: TENS, NMES, PEMF, ultrasound, therapy supplies, combo devices, traction ‎devices, laser treatment, hot/cold therapy, muscle stimulation, wound care, and bone growth, which are explained in greater detail below. End ‎users of SDP's products include healthcare professionals, physical therapists or patients, however, SDP only contracts directly with the supplier of the products and not end users.

The services provided by SDP for its customers are part of an integrated service package, which is typically governed by a single agreement. As such, these services account for the vast majority of SDP's revenues. SDP's remaining revenue is derived from sales of scrap, obsolete inventory, and other customer prompted liquidation events. ‎These events often occur during the development process for a new iteration of a product. To date, all SDP sales ‎have been made to arm's length customers.

Technologies

The products that SDP produces and operates its other services around, are predominantly focused on the pain management and post-surgical care space. The technologies used are myriad but some of the most important technologies are laid out below:

• Transcutaneous Electronic Nerve Stimulation (TENS): This technology operates by running electricity directly through the patient's skin to interfere with the typical functioning of neurons key to the pain feedback cycle. This technology falls into the much broader class of electronic stimulation products, which are SDP's specialty focus. These products have been around for some time and are generally well accepted in the medical community and by the FDA. SDP focuses primarily on producing large, capital equipment variants of these products typically used by physicians in their offices and workplaces as opposed to home use by the patient. The ultimate service provider will often bill an insurance provider for the use of the equipment on the patient.  Some patients pay for these services directly, and may or may not later seek reimbursement from an insurance provider.
• Pulsed Electromagnetic Field Technology (PEMF): This technology operates by generating magnetic fields around the device stimulating the activation of various cell types within patients. These products do not require the electrodes and wires of TENS products (although some manufacturers do make use of this delivery method) as magnetic fields do not need assistance in passing through the patients' skin. This technology was originally developed for use in bone stimulation but has since been applied to other issues as well in compliance with FDA rules and regulations. PEMF is part of the broader electronic stimulation device grouping. The ultimate service provider will often bill an insurance provider for the use of the equipment on the patient.  Some patients pay for these services directly, and may or may not later seek reimbursement from an insurance provider.
• Neuromuscular Electrical Stimulation (NMES): This technology utilizes similar systems as TENS. An electrical current is passed through the skin of the patient using electrodes. However, the goal and specifics of this technology are used not to interfere with nerve signaling, but to instead cause muscle contraction of a targeted muscle or muscle group. This technology is often used in rehabilitation of muscles post-surgery as well as for post-workout recovery in athletes. NMES is also a part of the larger electronic stimulation device grouping. The ultimate service provider will often bill an insurance provider for the use of the equipment on the patient.  Some patients pay for these services directly, and may or may not later seek reimbursement from an insurance provider. 

• Hot/Cold Therapy: Hot and cold therapy has been a mainstay of recovery sciences for a very long time. The majority of this equipment is not regulated by the FDA medical device regulations; however, it is ubiquitous in its usage in the recovery sciences. Hot and cold therapy used in conjunction or separately, is used by both individual patients, sports trainers and medical practitioners to relieve pain, enhance recovery, and reduce swelling. The manufacture and development of these products requires specific knowledge and production strategies to create appropriate gel matrices, which are typically proprietary, to create a safe and effective product.
• Laser Treatment: The use of lasers of various wavelengths in healthcare is a somewhat more recent development with applications having been approved by the FDA for everything from the recovery sciences to cosmetic procedures. SDP specializes in working with laser medical device products that cater to the recovery science space. These products are usually delivered directly to practitioners for use on a patient. The effects of each specific laser product vary greatly across the wavelength and intensity spectrum.
• Continuous Passive Motion (CPM): CPM devices are used in post-surgical recovery, typically related to repair and/or damage to joints. Often in the recovery process it is important that a limb be moved to prevent excessive formation of scar tissue. CPM devices serve to fill this need by passively moving a limb during the recovery process without assistance from the patient. These devices are typically not owned by individual patients but are supplied by practitioners who then bill a patient's insurance provider for use of the equipment.

The majority of SDP's revenue is derived from supply agreements with its customers, none of which expire within twelve ‎months of the date hereof,  however, they do contain cancellation provisions, both ‎for cause and upon notice. Among those, SDP derives a significant amount of its revenue from two principal supply agreements. If either of these Supply Agreements were to be canceled, the reduction in revenue and ‎profitability would have a material adverse effect on SDP's business. In the event of the cancellation of a contract by a key customer, SDP anticipates that it would use ‎any notice period to reduce payroll and costs in order to mitigate against any adverse effects of such cancellation.

Entities domiciled in the United States, such as SDP, are required to comply with federal, state and local environmental regulations.  All waste is ‎disposed of in compliance with EPA regulations. To date, SDP has never received a notice regarding ‎violation of any environmental law or regulation. SDP is not aware of any restrictions on ‎profit repatriation.  Future political or economic conditions may affect any business, but SDP ‎is not aware of any specific economic or political risks relevant to its products or services.  SDP expects that recession or depression would adversely affect its business. Although SDP generally does not sell directly to consumers, any decision by the government to restrict or ‎reduce public or private health insurance would be expected to reduce demand in the healthcare ‎industry generally, including the business of SDP.‎

SDP employs various experts to ensure compliance with FDA regulatory matters, Occupational Safety and Health Administration of the United States Department of Labor ("OSHA") regulatory matters, restriction of hazardous substance directive in electrical and electronic equipment ("RoHS") ‎regulatory matters, and other production and healthcare regulators. SDP also employs ‎experienced process, design, and production engineers who have the expertise to design, plan for ‎and actually produce compliant medical device products.

SDP may, from time to time, import ‎goods or raw materials produced in other nations, and a disruption of the supply from other nations, ‎or even other U.S.-based suppliers, could slow production and reduce revenues. As of the date of this report, SDP does not have any ‎foreign investments. ‎ 

Production Controls and Quality

The Clear Lake Facility is FDA Registered and ISO 13485:2016 certified.  SDP manages all internal and external activities following the in place Quality Management System to ensure compliance with the requirements of ISO 13485:2016, current Good Manufacturing Practices (GMP), and drives continuous improvement using lean and six sigma tools.

SDP is vertically integrated and can build many of its products from the raw material level up. The internal automation teams have automated many production processes. Much of the automation has been specifically designed by SDP engineers for their customers. This automation serves as an additional barrier to entry as it makes it difficult for competitors to be competitive on cost and quality.

All SDP suppliers are approved by its quality and procurement teams. SDP manages the activities of the supply chain daily. SDP's procurement team partners directly with suppliers to find new materials and processes that will improve its products and services.

SDP designs many of its own testing processes, engages in design for manufacturability activities on new and existing products and has partnerships with several design companies to help with product design.

All SDP employees are trained in lean and six sigma methodologies.

Regulatory

The FDA, Health Canada, and comparable agencies in other foreign countries impose requirements upon the design, development, manufacturing, marketing, and distribution of medical devices.  The applicable regulations require that the device owner obtain clearance or approval before the devices can be sold. After the applicable approvals and/or clearances are granted, the regulatory agencies require companies to comply with quality system requirements, investigate complaints, report and investigate certain adverse events and device malfunctions, comply with marketing restrictions and maintain annual registrations.

SDP is registered with the FDA as a contract manufacturer and as an importer of medical devices, and it maintains a quality system that is certified to ISO13485:2016.  SDP's specific responsibilities are defined in written quality agreements with its customers.  In general, SDP is responsible for investigating complaints and providing the results of the investigation to its customers.  The customers are responsible for reporting adverse events to appropriate regulatory authorities.

Market

SDP services medical device companies with operations across the globe. The largest ‎concentration of customer orders is delivered to the U.S. operating arms of customers. The U.S. ‎healthcare industry continues to grow rapidly as the population of 65+ individuals continues to climb.  The U.S. healthcare industry is often seen as acyclical or recession resistant due to the critical nature of its services.  The ‎market is currently estimated at $195 billion (US $156 billion) and expected to grow to $261 billion (US $208 billion) by 2023 (Source: selectusa.gov‎.).

SDP strives to iterate and improve its products based on customer needs.  However, SDP's products are not reliant on a single technology, process, or patent and as such is not ‎subject to substantial obsolescence risk from a single technological innovation.‎

In the United States, facilities that build medical devices ‎and the medical devices themselves must be cleared by the FDA.  The level of rigor involved with this ‎clearance process depends on the devices themselves as there are various levels of clearance. As an entity that operates within the U.S. medical device space, SDP employs FDA regulatory experts to ensure facility and product compliance with all ‎appropriate regulations.‎

Marketing Strategies

SDP sells through reputation, word of mouth and contacts known within the industry.  To date, all of SDP's sales ‎have been with arm's length customers.

Simbex, LLC

Overview

Based in Lebanon, New Hampshire, our subsidiary Simbex, LLC is an IP-based business that has a portfolio of several revenue and royalty generating products ranging from wearable technology to products for physical stability as well as expertise in development and design of many medical devices on the market it has innovated over the past several years. Simbex offers several services both within and without Salona Global related to the development, commercialization and design of medical device products.

Products - Engineering Expertise

Mechanical & Electrical Design & Engineering - Simbex approaches Mechanical and Electrical Hardware Design from a systems integration viewpoint. Their process starts by defining functional requirements and specifications of the design that take into consideration every step of the product life cycle. The outcome allows the final product to not only seamlessly integrate to meet functional needs, but also allows the product to integrate with external systems to meet manufacturing, distribution, packaging, and maintenance needs.

Design & Human Factors - By incorporating user feedback throughout development, Simbex creates products that meet human needs. We begin this process by obtaining the user's product requirements which are then verified and validated during critical times in the product development process.

Software & Web Development - Software development continually evolves with increasing complexity and integration of new technologies to help keep pace with customer expectations.  They have a diverse group of developers to cover the needs of users from embedded firmware to cloud based solutions.  They utilize an agile approach to software development to ensure development remains on track, and customer needs and requirements are met. Their DevOps and quality assurance processes helps ensure each project is "right sized" with a focus on delivering the right software at the right time and with the appropriate level of verification/validation from unit testing to integrated systems testing.

Applied Research - Drawing from their background in academic research and data analytics, Simbex helps drive product direction and strategy that is based on sound science and actionable data.  They become experts in the field to thoroughly understand the product we're developing and the underlying mechanisms of action, while leveraging real-world data to validate the product and its benefits. The emphasis on scientific integrity has allowed Simbex to create products of the highest quality and proven benefits. They consider applied research expertise a critical component of our product development partnership.

Regulatory

Simbex maintains a Quality Management System which is compliant to ISO 13485 and the FDA's Quality System Regulation 21 CFR 820 for the development of medical devices.  Their experienced engineering staff has developed products and devices for many industry leading companies and will provide a detailed Design History File, Device Master Record, and complete Risk Analysis compliant to ISO 14971.

Market

Simbex services medical device companies with operations predominantly in the U.S. The U.S. ‎healthcare industry continues to grow rapidly as the population of 65+ individuals continues to climb.  The U.S. healthcare industry is often seen as acyclical or recession resistant due to the critical nature of its services.  The ‎market is currently estimated at $195 billion (US $156 billion) and expected to grow to $261 billion (US $208 billion) by 2023 (Source: selectusa.gov‎.).  Simbex strives to innovate and develop products that meet the needs of the rapidly aging U.S. population and assist clients and Salona in growing revenues, improving products, and developing IP. 

In the United States, medical device manufacturers have to undergo rigorous testing and registration processes. Simbex brings unique expertise to these businesses in the design, registration, and go to market strategy of businesses attempting to take novel medical devices to market.‎

Marketing Strategies

Simbex sells through reputation, word of mouth and contacts known within the industry.  To date, all of Simbex' sales ‎have been made on an arm's length basis.

ALG Health Plus, LLC

On November 29, 2021, in connection with the acquisition of certain assets of ALG Health, LLC, the Company launched a new U.S. sales subsidiary called ALG Health Plus, LLC (ALG Health Plus), aimed at selling medical devices and supplies to small, independent hospitals and group purchasing organization ("GPO"), organizations that offer small medical offices and clinics access to devices and supplies on a larger scale creating efficiencies by aggregating purchasing volumes. As the Company continues to acquire and develop additional products, we also look to expand sales opportunities with products. ALG Health Plus, LLC was developed in partnership with experienced sales executives to attempt to sell medical supplies and devices to GPO's and other large businesses and systems. The sales channel is still in development at this time.

Mio-Guard, LLC

On March 11, 2022, the Company acquired Mio-Guard LLC, a Michigan based company engaged in the wholesale sale of sports medicine products in the mid-western, southern and central United States, through a wholly owned subsidiary. Mio-Guard and its predecessors had 2020 unaudited annual revenues of approximately $4.5M (US $3.6M) with 25% gross margins. Since 2009, the team at Mio-Guard has sold into the athletic training, physical therapy and orthopedics markets for sports medicine products. Mio-Guard has over 50 sales representatives in the United States with a focus on the Midwest, South and Central United States and long-standing relationships with institutions ranging from high school and college athletics to professional sports teams.

Products

To address the need for medical care in organized sports, Mio-Guard distributes products focused on improving recovery from and preventing injury. Their products are predominantly sold in athletic training rooms and physical therapy offices and fit into four broad categories:

Mio-Guard Capital Equipment Furnishings - Mio-Guard has extensive expertise in the organization and layout of cutting-edge training and recovery facilities and works closely with top US universities, professional athletic teams and other treatment providers to equip their facilities with top-of-the-line capital equipment to assist in the treatment of patients including large scale treatment systems, ergonomic treatment platforms, and other large and expensive equipment. The creation of recurring revenue through the ongoing setup and large capital equipment sales continue to deliver great value over time to the Mio-Guard business.

Mio-Guard Capital Equipment Modalities - Mio-Guard sells many of the types of products currently produced in the Company's SDP subsidiary including TENS, NMES, Laser, Hot/Cold Therapy and more. Mio-Guard has worked with training experts for years to help them identify the latest and greatest treatment modalities so they can better aid the recovery of their patients. 

Mio-Guard Supplies for Preventative Care - Many of Mio-Guard's products require the use of disposable treatment accessories including bracing, padding, athletic tape, medications, ultrasound gel and more for use in preventative care. These products are often used for acute care injuries that occur during highly visible athletic competition.

Mio-Guard Supplies for Injury & Rehabilitation - Mio-Guard offers many additional products that are used when an injury is sustained and in the rehabilitation of patient-athletes to return to full activity after an injury. Products in this category include wound care, emergency response, electrodes, resistance bands, analgesics, rollers and massagers. Returning athletes to the field of play after an injury can be a lengthy and expensive process and Mio-Guard offers supplies and equipment to assist in every stage of the athlete's continuum of care.

Market

Mio-Guard services physical trainers and athletic trainers predominantly in the midwest and southern U.S.  The U.S. ‎healthcare industry continues to grow rapidly as the population of 65+ individuals continues to climb. As the U.S. population ages, management expects that the number of individuals attempting to recover from surgery and regain physical independence will increase.  The U.S. healthcare industry is often seen as acyclical or recession resistant due to the critical nature of its services.  The ‎market is currently estimated at $195 billion (US $156 billion) and expected to grow to $261 billion (US $208 billion) by 2023 (Source: selectusa.gov‎.).

A 2015 study found that approximately 1.4 million injuries occur annually just in the secondary school setting¹. Between 2009-14 there were about 210,700 injuries on average per year among roughly 478,900 college athletes².

Marketing Strategies

Mio-Guard approaches the market through a combination of contracted and employed sales reps who are each responsible for a set geographic territory within the U.S. These representatives' interface with universities, professional athletic teams, physical therapists and athletic trainers to sell products and develop relationships. Mio-Guard has strong connections throughout the recovery science industry which we intend to utilize to grow sales of other product lines. Mio-Guard supports our sales team with industry leading knowledge and expertise in the products and technologies that we promote coupled with installation and design services that most of our competitors do not offer.

Our go to market strategy includes meeting customers in their clinic or athletic training room, seeing them at conventions and professional conferences and pairing that with a targeted social media approach utilizing the power of micro-influencers.  In working with our customers closely and in person we're able to recognize opportunities in advance of our competitors and put Mio-Guard in an advantageous position long before an opportunity is publicly available.

________________________________

¹ New Study Shows 37 Percent of Public Secondary Schools Meet Gold Standard of Care For Their Athletes, NATA Press Release, March 11, 2015. URL accessed 4/8/2022. https://www.nata.org/press-release/031115/new-study-shows-37-percent-public-secondary-schools-meet-gold-standard-care

² College Athletes Often Bear the Cost of Injuries and Insurance, Best Colleges.com by Dean Golembeski, November 10, 2021. URL accessed /4/8/2022. https://www.bestcolleges.com/news/2021/09/10/college-athletes-ncaa-injuries-insurance. 

EMPLOYEES

As of February 28, 2022, the Company and its subsidiaries had no full-time and no part-time employees in Canada and had 99 full-time employees and 7 part-time employees in the United States through its subsidiaries.

AVAILABLE INFORMATION

Our investor relations website address is www.salonaglobal.com. We are required to file Annual Reports on Form 10-K and Quarterly Reports on Form 10-Q with the SEC on a regular basis, and are required to disclose certain material events in a Current Report on Form 8-K. The SEC also maintains a website that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC. The SEC’s website is located at http://www.sec.gov.

Investing in our common shares involves a high degree of risk. You should carefully consider the following risks and all other information contained in this Annual Report, including our financial statements and the related notes, before investing in our securities. The risks and uncertainties described below are not the only ones we face, but include the most significant factors currently known by us that make investing in our securities speculative or risky. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, also may become important factors that affect us. If any of the following risks materialize, our business, financial condition and results of operations could be materially harmed. In that case, the trading price of our securities could decline, and you may lose some or all of your investment.

Risks Related to Our Business and Industry

We have a limited business history.

On March 11, 2021, we completed a "Change of Business," as defined by the TSX Venture Exchange, to become an acquisition-oriented medical device company with plans to achieve scale through further acquisitions and organic growth, with the intent to operate in the recovery science market, including postoperative pain, wound care and other markets serving the aging population in the United States.  Prior to our Change of Business, we were engaged in the business of making loans to third parties.

As discussed above, we acquired SDP on May 21, 2021, Simbex on September 30, 2021 and the ALG assets on November 28, 2021 through several wholly owned subsidiaries.  Information relating to the business and related services of SDP contained in this Annual Report covers the period from May 21, 2021, through February 28, 2022.  Information relating to Simbex' business and related services contained in this Annual Report covers the period from September 30, 2021 through February 28, 2022.  In addition to operating the businesses acquired in connection with the SDP, Simbex and ALG acquisitions, our current strategy is to identify and acquire additional operating businesses in the medical technology/device sector, some of which may be complementary to SDP.  Our likelihood of success must be considered in light of the problems, expenses, difficulties, complications and delays frequently encountered in connection with the establishment of any business. We have limited financial resources and there is no assurance that additional funding will be available to us for further operations or to fulfill our obligations under applicable agreements.  There is no assurance that we can generate revenues, operate profitably, or provide a return on investment, or that we will successfully implement our business plans.

We may be negatively impacted by challenging global economic conditions.

Our business, financial condition, results of operations and cash flow may be negatively impacted by challenging global economic conditions. For example, as discussed in more detail below, since early 2020, the U.S. and other world economies have experienced turmoil due to the novel coronavirus pandemic and related "shelter-in-place" orders and other governmental mandates ("COVID-19"), which has resulted in global economic uncertainty.  A global economic slowdown would cause disruptions and extreme volatility in global financial markets, increased rates of default and bankruptcy and declining consumer and business confidence. The COVID-19 pandemic has already disrupted, and could potentially further disrupt, our supply chain or interfere with normal business operations due to the loss of employee availability. The broader impact of the COVID-19 pandemic on investors, businesses, the global economy or financial and commodity markets may also have a material adverse impact on our results of operations, financial condition and the trading price of our common shares.

Additionally, the U.S. has imposed and may impose additional quotas, duties, tariffs, retaliatory or trade protection measures or other restrictions or regulations and may adversely adjust prevailing quota, duty or tariff levels, which can affect both the materials that we use in our products and the sale of finished products. For example, the tariffs imposed by the U.S. on materials from China are impacting materials that we import for use in packaging in the U.S. Measures to reduce the impact of tariff increases or trade restrictions, including geographical diversification of our sources of supply, adjustments in packaging design and fabrication or increased prices, could increase our costs, delay our time to market and/or decrease sales. Other governmental action related to tariffs or international trade agreements has the potential to adversely impact demand for our products and our costs, customers, suppliers and global economic conditions and cause higher volatility in financial markets. While we actively review existing and proposed measures to seek to assess the impact of them on our business, changes in tariff rates, import duties and other new or augmented trade restrictions could have a number of negative impacts on our business, including higher consumer prices and reduced demand for our products and higher input costs. 

Our failure to comply with all regulatory, permit and license requirements could result in criminal or civil sanctions or an adverse effect on our business.

We are operating in an industry that is subject to extensive federal and state regulation. Failure to comply with applicable regulations could result in severe criminal or civil sanctions or require us to make significant changes to our operations that could adversely affect our business, financial condition and operating results.  Our operations are also subject to state laws governing, among other things, distribution of medical equipment and certain types of health activities, and we may be required to obtain and maintain licenses in each state to act as an equipment supplier. Additionally, accreditation is required by many payors. If we fail to obtain or maintain any required accreditation, it could have an impact on our business.

Increased regulatory burdens may result in significant loss of revenue, substantial out-of-pocket costs and loss of management focus on our business.

Increasing regulatory burdens, including premarketing approval delays, may result in significant loss of revenue, unpredictable costs and loss of management focus on developing and marketing products that improve the quality of healthcare. Medical device companies are increasingly burdened with bureaucratic and regulator demands that may not be reasonably related to assuring the safety or effectiveness of the devices that they provide. Premarketing submission administrative burdens, and substantial "user fees" or notified body review fees, represent a significant non-clinical and/or non-scientific barrier to new product introduction, resulting in lack of investment or delays to revenues from new or improved devices. The risks associated with such circumstances relate not only to substantial out-of-pocket costs, including potential litigation, but also loss of business and a diversion of attention of key employees for an extended period of time from managing their normal responsibilities, particularly in new product development and routine quality assurance activities.

Healthcare reform legislation may negatively impact us.

Healthcare reform laws significantly affect the U.S. healthcare services industry. In recent years, many legislative proposals have been introduced or proposed in Congress and in some state legislatures that would affect major changes in the healthcare system, either nationally or at the state level. The ultimate content, timing or effect of any healthcare reform legislation and the impact of potential legislation on us is uncertain and difficult, if not impossible, to predict. That impact may be material to our business, financial condition or results of operations.  Legislative or executive order healthcare reform in the United States has the potential to render the U.S. medical device marketplace unpredictable. A fully government-run healthcare system might expand demand for healthcare services to previously uninsured populations but may also reduce or eliminate healthcare consumer choice as well as commercial incentives for innovation. Although we do not collect revenue by billing insurance providers, changes in reimbursement by public or private insurance could reduce the profitability of providing physical therapy services, and indirectly decrease demand for our products or our acquisition targets. 

We face intense competition.

The healthcare and medical device industry is highly competitive and dynamic and will become more competitive as new players enter the market. Certain competitors will be subsidiaries or divisions of larger, much better capitalized companies. Certain competitors will have vertically integrated production and services sectors of the market. We may have less capital and may encounter greater operational challenges in serving the market.  Better capitalized competitors may be able to borrow money or raise debt to purchase equipment on more favorable terms or more easily than us. Potential competitors could have significantly greater financial, research and development, production, and sales and marketing resources than we have and could utilize their greater resources to acquire or develop new technologies or products that could effectively compete with ours. Additionally, demand for our products could be diminished by technological change or equivalent or superior products developed by competitors. Competing in these markets could result in price-cutting, reduced profit margins and loss of market share, any of which would harm our business, financial condition and results of operations. Our ability to compete effectively depends upon our ability to distinguish ourselves from our competitors and their products, on such factors as safety and effectiveness, product pricing, compelling clinical data and quality of customer support.

We may be unable to identify and complete acquisitions in the medical technology sector.

We may not be able to successfully identify and complete corporate transactions on favorable terms or achieve anticipated synergies relating to any acquisitions in the medical technology sector, and such acquisitions could result in unforeseen operating difficulties and expenditures or require significant management resources and significant charges. As a part of our anticipated growth strategy, we are continuously exploring potential acquisitions of complementary businesses, technologies, services or products. We may be unable to find suitable acquisition candidates. Even if we identify appropriate acquisition candidates, we may be unable to complete the acquisitions on favorable terms, if at all, as a result of changes in tax laws, regulations, financial market, or other economic or market conditions. We may incur material costs in pursuing successful or unsuccessful acquisitions. Acquisition activities can be thwarted by overtures from competitors for the targeted candidates, government regulation and replacement product developments within the industry in which we are expected to operate. Competition may intensify due to the ongoing consolidation in the healthcare industry, which may increase our acquisition costs. Competition from other buyers of medical device companies may drive asset prices to levels that we do not believe are justified in the long term, which could delay our acquisition strategy. In addition, the process of integrating an acquired business, technology, service or product into existing operations could result in unforeseen difficulties and expenditures. Acquired businesses may require capital infusions for the possibility of future growth. Integrating completed acquisitions into existing operations involves numerous short-term and long-term risks, including diversion of management's attention, failure to retain key personnel, long-term value of acquired intangible assets and acquisition expenses. In addition, we may be required to comply with laws, rules and regulations that may differ from those of the states in which our operations are currently conducted. Moreover, we may not realize the anticipated financial or other benefits of an acquisition.

Future acquisitions could also involve the issuance of equity securities, the incurrence of debt, assumption of actual or contingent liabilities or amortization of expenses related to other intangible assets, any of which could adversely impact our financial condition or results of operations. The issuance of shares for an acquisition may result in dilution to our shareholders and, depending on the number of shares that may be issued, the resale of such shares could affect the trading price of our common shares. In addition, equity or debt financing required for such acquisitions may not be available. We may not be able to identify all actual or contingent liabilities associated with a particular acquisition, and representations and warranties in a purchase agreement, if any, may not be sufficient to allow for recovery of losses.

Any corporate transaction will be accompanied by certain risks including but not limited to: exposure to unknown liabilities of acquired companies and the unknown issues with any associated technologies or research; certain acquired businesses may have business models with lower operating margins, which could affect our overall operating results in future periods; higher than anticipated acquisition costs and expenses; the difficulty and expense of integrating operations, systems, and personnel of acquired companies; disruption of ongoing business; uncertainty that an acquired business will continue to maintain its pre-acquisition revenue and growth rates, or be profitable; inability to retain key customers, vendors, and other business partners of the acquired company; diversion of management's time and attention; the realization of financial and operating risks not fully anticipated; and potential challenges under antitrust laws, either before or after an acquisition is consummated, which could involve substantial legal costs and result in our having to abandon the transaction or make a divestiture.  We may not be able to successfully overcome these risks and other problems associated with acquisitions and this may adversely affect our business, financial condition or results of operations.

We may be unable to achieve our growth strategy.

We may have difficulty identifying or acquiring suitable acquisition targets and in achieving organic growth, which is a significant aspect of our proposed business model. In the event that we are successful in consummating acquisitions in the future, such acquisitions may negatively impact our business, financial condition, results of operations, cash flows and prospects due to a variety of factors, including the acquired company's business not achieving the anticipated revenue, earnings or cash flows, assumption of liabilities or risks beyond our estimates or the diversion of the attention of management from our then existing business. If we are unable to continue to grow or manage our growth for any of these reasons, we may be unable to achieve our proposed expansion strategy, which could adversely impact our earnings, revenue and profits.

We may be unable to execute on our planned international expansion.

A component of our proposed growth strategy is to expand our operations and sales internationally. There can be no assurance that we will be able to identify any targets in foreign jurisdictions, successfully market, distribute, sell and deliver our products in foreign markets, or otherwise be able to successfully expand our international sales. New trade or tariff policies and geopolitical tensions and disputes could make international markets less accessible or profitable. Compliance with various regulations and laws of foreign nations may be costly and require scale to be financially attractive. Global operations could cause us to be subject to unexpected, uncontrollable and rapidly changing risks, events and circumstances.

We may fail in our efforts to manage growth.

The success of our business strategy depends, in part, on our ability to expand our operations in the future. Our anticipated growth strategy is expected to place demands on management, operational and financial information systems, and other resources. Expansion of our operations may require substantial financial resources and management attention. To accommodate anticipated future growth, and to compete effectively, we may need to improve our management, implement operational and financial information systems, and expand, train, manage, and motivate our workforce. Our personnel, systems, procedures, or controls may not be adequate to support our operations in the future. Further, focusing financial resources and diverting management's attention to the expansion of our operations may negatively impact our financial results. Any failure to improve our management, to implement operational and financial information systems, or expand, train, manage, or motivate our workforce, as required, may reduce or prevent our growth plans.

We are dependent on key distributors.

Our reliance on third party distributors in some markets may result in less predictable revenues. Distributors may have varying expertise in marketing and selling specialty medical devices and may also sell other devices that could result in less focus on our products.

We are dependent on key customers, markets and products.

We produce a limited number of products and have a concentration of orders from key customers, primarily in the U.S. market, from which we derive a substantial portion of our revenue. In connection with the acquisition of SDP, we acquired SDP's two main supply agreements, which in the aggregate contributed 0% and 68% of our total revenue for the fiscal years ended February 28, 2021 and 2022, respectively. These supply agreements may be terminated by either party from time to time under certain conditions. Customers may cancel or choose not to renew their contracts. Changes in economic conditions could influence future actions of our partners or other customers. To the extent that any significant agreement or agreements with our customers are canceled, including, without limitation, our supply agreements, or are not renewed or replaced with other arrangements having at least as favorable terms, our business, financial condition and results of operations could be materially adversely affected. We seek to expand our product offerings, increase the number of customers and expand our markets, but there is no assurance that this plan will succeed.

Our customers depend on third-party coverage and reimbursements. The failure of healthcare programs to provide coverage and reimbursement, or reductions in levels of reimbursement, could have a material adverse effect on our business.

The ability of our customers to obtain reimbursements for products they purchase from us or from intermediaries, or from therapies they provide using the products they purchase from the Company or our intermediaries is important to our business. Demand for many of our existing and new medical products is, and will continue to be, affected by the extent to which government healthcare programs and private health insurers reimburse our customers for patients' medical expenses in the countries where we do business. Any reduction in the amount of reimbursements received by our customers could harm our business by reducing their selection of our products and the prices they are willing to pay.

In addition, as a result of their purchasing power, third-party payors are implementing cost-cutting measures such as seeking discounts, price reductions or other incentives from medical products suppliers and imposing limitations on coverage and reimbursements for medical technologies and procedures. These trends could compel us to reduce prices for our existing products and potential new products and could cause a decrease in the size of the market or a potential increase in competition that could have a material adverse effect on our business, results of operations, financial condition and cash flows.

We may be unable to successfully market our products and services.

We may not be successful in marketing our products and services. In order to sustain and increase revenues, our products and services must achieve a significant degree of market acceptance. If we are unable to promote, market and sell our products and services or secure relationships with customers, our business, financial condition and results of operations would be materially adversely affected. Levels of market acceptance for products and services could be impacted by several factors, many of which are not within our control, including but not limited to: safety, efficacy, convenience and cost-effectiveness of our products and services; scope of approved uses and marketing approval; difficulty in, or excessive costs to, manufacturing; infringement or alleged infringement of the patents or intellectual property rights of others; maintenance of business arrangements with healthcare providers; availability of alternative products or services from competitors; and acceptance of the price of products and services. If our competitors are able to develop and market products that are preferred over those offered by us, are able to grow service businesses that are preferred over our services or other businesses preferred over other products and services that may be developed, we may not be able to generate sufficient revenues to continue our operations. We may not be able to contend successfully with competitors. The medical device industry is highly competitive and subject to significant and rapid technological changes as new technologies, services and treatments are developed. We plan to market our products in other countries besides the United States. We may not succeed in our marketing efforts. We may incur substantial initial costs associated with entering a new market. It may take time to meet all the legal, regulatory and economic burdens of entering a new market, and those costs may not be recouped for some time or at all, which may have an impact upon our financial performance. 

We may fail to keep pace with necessary technological changes.

The market for some of our products may be characterized by rapid change and technological improvements. Failure to respond in a timely and cost-effective way to these technological developments could result in serious harm to our business and operating results. SDP derived, and it is expected that we will continue to derive, a substantial portion of revenues from the development and sale of products in the medical device industry. As a result, our success will depend, in part, on our ability to develop and market product offerings that respond in a timely manner to the technological advances of our competitors, evolving industry standards and changing patient preferences. There is no assurance that we will keep up with technological improvements.

We are a holding company and operate through our subsidiaries.

We conduct our operations through our subsidiaries. Therefore, to the extent of these holdings, we (directly and indirectly) are dependent on the cash flows of these subsidiaries to meet our obligations. The ability of these subsidiaries to make payments to their parent companies may be constrained by a variety of factors, including the level of taxation, particularly corporate profits and withholding taxes, in the jurisdiction in which each subsidiary operates, and the introduction of exchange controls or repatriation restrictions or the availability of hard currency to be repatriated. In the event of a bankruptcy, liquidation or reorganization of any of our material subsidiaries, holders of indebtedness and trade creditors may be entitled to payment of their claims from the assets of those subsidiaries before us.

We may be subject to certain conflicts of interest.

Certain of our directors and officers will be engaged in, and will continue to engage in, other business activities on their own behalf and on behalf of other companies and, as a result of these and other activities, such directors and officers may become subject to conflicts of interest. Our independent members of the Board will review any such transactions and report to the Audit Committee of the Board.  The Business Corporations Act of British Columbia, as amended, including the regulations promulgated thereunder (the "BCBCA") provides that in the event that a director has a material interest in a contract or proposed contract or agreement that is material to an issuer, the director shall disclose his interest in such contract or agreement and shall refrain from voting on any matter in respect of such contract or agreement, subject to and in accordance with the BCBCA. To the extent that conflicts of interest arise, such conflicts will be resolved in accordance with the provisions of the BCBCA.

We do not have foreign private issuer status.

As of March 1, 2020, the Company ceased to meet the definition of a "foreign private issuer" set out in Rule 405 of the Securities Act. As a result, our equity securities will be deemed to be "restricted securities" as such term is defined in Rule 144 of the Securities Act. Any such securities issued by us must be registered with the SEC or be issued on an exempt basis and carry resale restrictions. As a result of the loss of foreign private issuer status, we filed a registration statement on Form S-1 to register the resale of securities issued in connection with certain private equity financings, and we are now subject to SEC rules and regulations regarding disclosure which require the filing of various periodic reports on Forms 10-K, 10-Q and 8-K. Compliance with these obligations requires significant financial and management resources. We are also subject to liability under the Securities Act and the Exchange Act. Liability under these acts can lead to monetary fines, limitations on future financings and, if imposed, may impede our ability to finance our business.

We may be subject to litigation.

We and/or our directors may be subject to a variety of civil or other legal proceedings, with or without merit, which may redirect substantial amounts of our resources. Our devices may be used in inherently risky situations to help physicians achieve a more positive outcome than what might otherwise be the case. In any lawsuit where an individual plaintiff suffered permanent physical injury, the possibility of a large award for damages exists whether or not a causal relationship exists. Moreover, even if we are successful in litigation, litigation can redirect significant resources including, but not limited to, our management's time and attention and our capital.

We face risks relating to our insurance coverage.

The marketing and sale of medical device products creates an inherent risk of claims for product liability. We carry product liability insurance that we consider adequate to protect us from claims. There can be no assurance that we will have resources sufficient to satisfy liability claims in excess of policy limits if required to do so. Also, if we are subject to such liability claims, there is no assurance that our insurance provider will continue to insure us or that our insurance rates will not substantially rise, resulting in increased costs to us or forcing us to either pay higher premiums or reduce our coverage amounts, which would result in increased liability to claims.

We may be unable to maintain the intellectual property rights on which our future success is dependent.

It is anticipated that our trademarks, trade secrets and other intellectual property will be a component of our success. Effective trademark, trade secret and intellectual property protection may not be available to us in every jurisdiction in which our products may be available. In addition, if any third-party confidentiality agreements in our favor are breached, there may not be an adequate remedy available to us. If our trade secrets become publicly known, it may cause us to lose competitive advantages.

We may be exposed to infringement or misappropriation claims by third parties, which, if determined adversely to us, could subject us to significant liabilities and other costs.

Other companies, including our competitors, may obtain patents or other proprietary rights that would limit, interfere with, or otherwise circumscribe our ability to make, use, or sell products. Should there be a successful claim of infringement against us and if we could not license the alleged infringed technology at a reasonable cost, our business and operating results could be adversely affected. There has been substantial litigation regarding patent and other intellectual property rights in the medical device industry. The validity and breadth of claims covered in medical technology patents involve complex legal and factual questions for which important legal principles remain unresolved. Any litigation claims against us, independent of their validity, may result in substantial costs and the diversion of resources with no assurance of success.

Our products may be subject to product recalls.

Our products may be subject to recall, despite receiving United States Food and Drug Administration ("FDA") or foreign clearance or approval, which would harm our reputation and business. The FDA and similar governmental authorities in other countries have the authority to require the recall of medical device products in the event of material deficiencies or defects in design or manufacturing. A government mandated or voluntary recall by us could occur as a result of component failures, manufacturing errors or design defects, including defects in labeling. Any recall would divert managerial and financial resources and could harm our reputation with customers. There can be no assurance that we will not have product recalls in the future or that such recalls would not have a material adverse effect on our business.

We face risks related to our information technology systems, and potential cyber-attacks and security breaches.

Increased sophistication and activities of perpetrators of cyber-attacks have resulted in an increase in information security risks in recent years. Hackers develop and deploy viruses, worms, and other malicious software programs that attack products and services and gain access to networks and data centers. If we were to experience difficulties maintaining existing systems or implementing new systems, we could incur significant losses due to disruptions in our operations. Additionally, these systems may contain valuable proprietary and confidential information and personal customer data. A security breach could result in disruptions of our internal systems and business applications, harm to our competitive position from the compromise of confidential business information, or subject us to liability under laws that protect personal data. As cyber threats continue to evolve, we may be required to expend additional resources to continue to enhance our information security measures and/or to investigate and remediate any information security vulnerabilities. Any of these consequences would adversely affect our revenue and margins.

We are subject to antitrust laws, violations of which may incur substantial penalties that could have a material adverse effect on our business.

The U.S. healthcare industry is subject to close antitrust scrutiny. In recent years, U.S. regulatory authorities have taken increasing steps to review and, in some cases, take enforcement action against business conduct and acquisitions in the healthcare industry. Violations of antitrust laws may be punishable by substantial penalties including treble damages, significant monetary fines, civil penalties, criminal sanctions, and consent decrees and injunctions prohibiting certain activities or requiring divestiture or discontinuance of business operations. Any of these penalties could have material adverse effects on our financial condition and results of operations.

We are subject to debt instruments and restrictive covenants that may impede our ability to conduct our business.

We are subject to various restrictive covenants and events of default, including payment of interest and principal when due, under a commercial loan agreement entered into by our subsidiary SDP with a third party financial institution on June 9, 2021 in connection with a $6,813,180 (US$5,400,000) revolving loan facility with a maturity on August 1, 2023, and a secured promissory note issued by SDP in the principal amount of $936,696 (US$750,000) maturing on June 1, 2024 (collectively, the "Loans"). If there is an event of default under the Loans, the principal amount owing thereunder, plus accrued and unpaid interest, may be declared immediately due and payable.  If such an event occurs, it could have a material negative financial impact on the Company.  Any extended default under the Loans could result in the loss of our entire business.  In addition, the Loans include various conditions and covenants that require us to obtain consents prior to carrying out certain activities and entering into certain transactions.  The inability to meet these conditions and covenants or obtain lenders' consent to carry out restricted activities could materially and adversely affect our business and results of operations.

We are subject to environmental regulations and any failure to comply may result in substantial fines and sanctions.

Our operations are subject to state, federal and international environmental laws and regulations governing, among other things, emissions to air, discharges to waters and the generation, handling, storage, transportation, treatment and disposal of raw materials, waste and other materials. Many of these laws and regulations provide for substantial fines and criminal sanctions for violations. We believe that we are operating our business and facility in a manner that complies in all material respects with environmental, health and safety laws and regulations; however, we may incur material costs or liabilities if we fail to operate in full compliance. We do not maintain environmental damage insurance coverage with respect to the products which we manufacture.

We may have to make significant expenditures in the future to comply with evolving environmental, health and safety requirements, including new requirements that may be adopted or imposed in the future. To meet changing licensing and regulatory standards, we may have to make significant additional site or operational modifications that could involve substantial expenditures or reduction or suspension of some of our operations. We cannot be certain that we have identified all environmental and health and safety matters affecting our activities, and in the future our environmental, health and safety problems, and the costs to remediate them, may be materially greater than we expect.

Our results of operations could be affected by currency fluctuations.

Our properties are all located in the United States and most costs associated with these properties are paid in U.S. dollars. At this time, all revenues are earned in U.S. dollars. If we are successful in marketing products to Europe and Japan, revenues may be earned in euros, yen and other diverse currencies. Marketing costs may also be incurred in such currencies. There can be significant swings in the exchange rate between these currencies and the Canadian dollar. There are no plans at this time to hedge against any exchange rate fluctuations in currencies.

Risks Related to Our Finances and Capital Requirements

We may be unable to obtain sufficient capital or liquidity to fulfill our business requirements.

Additional funds for the establishment of our business and growth plans may be required. No assurances can be given that we will be able to raise the additional funding that may be required for such activities, should such funding not be fully generated from operations. To meet such funding requirements, we may be required to undertake additional equity financing, which would be dilutive to shareholders. Debt financing, if available, may also involve restrictions on financing and operating activities. There is no assurance that additional financing will be available on terms acceptable to us or at all. If we are unable to obtain additional financing as needed, we may be required to reduce the scope of our operations and pursue only activities or acquire targets that can be funded through cash flows generated from our existing operations, if any.

We may face difficulties acquiring additional or traditional financing.

We anticipate that we may have significant ongoing capital expenditure requirements. If we are unable to obtain necessary capital on favorable terms or at all, we may not be able to execute on our proposed business plans and our business, financial condition, results of operations, cash flows and prospects may be adversely affected. The development of our business (including acquisitions) may require additional financing, which may involve high transaction costs, dilution to our shareholders, high interest rates or unfavorable terms and conditions. Failure to obtain sufficient financing may result in the delay or indefinite postponement of our business plans and our business, financial condition, results of operations and prospects may be adversely affected. There can be no assurance that additional capital or other types of financing will be available if needed or that, if available, the terms of such financing will be favorable to us.

We may invest in pre-revenue and other revenue-generating medical device companies which may not be able to meet anticipated revenue targets in the future.

We may make investments in companies with no significant sources of operating cash flow and no revenue from operations, or companies that have revenues but are introducing new product lines with no revenue history and a need to fund production and marketing expenses. Our investments in such companies will be subject to risks and uncertainties that new companies with no operating history may face. In particular, there is a risk that our investment in these pre-revenue companies or new products will not be able to meet anticipated revenue targets or will generate no revenue at all. The risk is that underperforming pre-revenue companies may lead to these businesses failing, which could have a material adverse effect on our business, prospects, revenue, results of operation and financial condition.

Our sales are difficult to forecast.

As a result of recent and ongoing regulatory and policy changes in the medical device industries, the market data available is limited and may be unreliable. We must rely largely on our own market research to forecast sales, as detailed forecasts are not generally obtainable from other sources in the states in which our business operates. Additionally, any market research and our projections of estimated total retail sales, demographics, demand and similar consumer research, are based on assumptions from limited and unreliable market data. Projections are inherently subject to varying degrees of uncertainty and their achievability depends on the timing and probability of a complex series of future events. There is no assurance that the assumptions upon which these projections are based will be realized. Actual results may differ materially from projected results for several reasons including increases in operating expenses, changes or shifts in regulations or applicable laws, undiscovered or unanticipated adverse industry and economic conditions, and unanticipated competition. Accordingly, our investors should not rely on any projections to indicate the actual results we might achieve.

Changes in our customer, product or competition mix could cause our product margin to fluctuate.

From time to time, we may experience changes in our customer mix, our product mix or our competition mix. Changes in our customer mix may result from geographic expansion or contractions, legislative or enforcement priority changes affecting the products we distribute, selling activities within current geographic markets and targeted selling activities to new customer sectors. Changes in our product mix may result from marketing activities to existing customers, the needs communicated to us from existing and prospective customers and from legislative changes. Changes in our competition mix may result from well-financed competitors entering into our business segment. If customer demand for lower-margin products increases and demand for higher-margin products decreases, our business, results of operations and financial condition may suffer.

We may not achieve or maintain profitability in the future.

We intend to expend significant funds to make acquisitions and to fund our working capital. Our efforts to grow our business may be more costly than we expect, and we may not be able to increase our revenue enough to offset higher operating expenses. We may incur significant losses in the future for a number of reasons, including as a result of unforeseen expenses, difficulties, complications and delays, the other risks described in this Annual Report and other unknown events. The amount of future net losses will depend, in part, on the growth of our future expenses and our ability to generate revenue. If we continue to incur losses in the future, the net losses and negative cash flows incurred to date, together with any such future losses, will have an adverse effect on our shareholders' equity and working capital. Even if we achieve profitability in the future, we may not be able to sustain profitability in subsequent periods. If we are unable to achieve and sustain profitability, the market price of our common shares may significantly decrease and our ability to raise capital, expand our business or continue our operations may be impaired. A decline in our value may also cause an investor to lose all or part of their investment.

Risks Related to Our Common Shares

Our common shares are a high-risk investment.

Our common shares are listed in Canada on the TSXV, and we are not listed on any U.S. national securities exchange. Consequently, there is a limited trading market for our common shares, which may affect the ability of shareholders to sell our common shares in the U.S. and the prices at which they may be able to sell our common shares. The TSXV is a smaller exchange in Canada and a United States broker may not facilitate trades in Canada. The market price of our common shares has been volatile and fluctuates widely in price in response to various factors which are beyond our control. The price of our common shares is not necessarily indicative of our operating performance or long-term business prospects. In addition, the securities markets have from time-to-time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies. These market fluctuations may also materially and adversely affect the market price of our common shares.

In the United States, our common shares are considered a "penny stock", and our shares are not listed and trading on any U.S. exchange. The SEC has adopted rules that regulate broker-dealer practices in connection with transactions in "penny stocks". These rules further restrict the trading activity and marketability of our common shares. As a result of the foregoing, an investment in our common shares should be considered a high-risk investment.

Additional issuances of common shares may result in further dilution.

We may issue additional common shares in the future to finance acquisitions or operations, which may dilute an existing investor's holdings. We cannot predict the size or nature of future issuances or the effect that future issuances and sales of common shares will have on the market price of our common shares. Issuances of a substantial number of additional common shares, or the perception that such issuances could occur, may adversely affect prevailing market prices for our common shares. With any additional issuance of common shares, our investors will suffer dilution to their voting power and economic interest.

Our share price may be volatile and as a result investors could lose all or part of their investment.

In addition to volatility associated with equity securities in general, the value of an investment in our common shares could decline due to the impact of any of the following factors upon the market price of our common shares:

• our ability to execute our business plan;
• period-to-period fluctuations in our financial results;
• changes in the economic performance or market valuations of companies in the industry in which we operate;
• addition or departure of our executive officers and other key personnel;
• sales or perceived sales of additional shares of our common shares;
• operating and financial performance that varies from the expectations of management, securities analysts and investors;
• regulatory changes affecting our industry generally and our business and operations both domestically and abroad;
• announcements of developments and other material events by us or our competitors;
• changes in global financial markets and global economies and general market conditions;
• significant acquisitions or business combinations, strategic partnerships, joint ventures or capital commitments by or involving us or our competitors; and
• news reports relating to trends, concerns, technological or competitive developments, regulatory changes and other related issues in our industry or target markets.

In addition, the securities markets have from time-to-time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies. These market fluctuations may also materially and adversely affect the market price of our common shares.

Resales of our common shares in the United States must comply with state blue sky laws.

Our common shares are not "covered securities" under Section 18(a) of the Securities Act of 1933, as amended, because the common shares are not listed for trading on a U.S. national securities exchange and must be resold in compliance with applicable state blue sky laws.  Applicability is based upon the residence of the purchaser.  While some states may have an exemption for resale without compliance with state blue sky laws, other states will require compliance with blue sky laws.  Such compliance can be costly and lengthy.  Any delays could result in burdensome wait times or the termination of the resale transaction.

We do not intend to pay dividends on our common shares and, consequently, the ability of investors to achieve a return on their investment will depend on appreciation in the price of our common shares.

Because we have no near-term plans to pay cash dividends on our common shares, investors must look solely to share appreciation for a return on their investment. We anticipate retaining all available funds and any future earnings for use in the operation and expansion of our business and there is no expectation that we will declare or pay any cash dividends on our common shares in the near term. Any future determination as to the declaration and payment of cash dividends will be at the discretion of the Board and will depend on the existing conditions, including our financial condition, results of operations, contractual restrictions, capital requirements, business prospects, and other factors that the Board considers relevant. Accordingly, investors will only see a return on their investment if the value of our common shares appreciates.

We are subject to the continued listing criteria of the TSXV and our failure to satisfy these criteria may result in the suspension or delisting of the common shares.

Our common shares are currently listed on the TSXV. In order to maintain the listing, we must maintain certain financial and share distribution targets, including maintaining a minimum number of public shareholders. In addition to objective standards, the TSXV may delist or suspend from trading the securities of any issuer if, in the TSXV's opinion, the issuer or its principal operating subsidiary substantially reduces or impairs its principal operating assets, ceases or discontinues a substantial portion of its operations or business for any reason, or seeks protection or is placed under the protection of any insolvency or bankruptcy laws or is placed into receivership, or if any other event occurs or any condition exists which, in the opinion of the TSXV, makes continued listing on the TSXV inadvisable or not in the public interest.

If the TSXV suspends or delists our common shares, investors may face material adverse consequences, including, but not limited to, a lack of trading market for our common shares, reduced liquidity, decreased analyst coverage of the Company, and an inability for us to obtain additional financing to fund our operations.

We are eligible to be treated as an "emerging growth company" as defined in the JOBS Act, and we cannot be certain if the reduced disclosure requirements applicable to emerging growth companies will make our common shares less attractive to investors.

As a result, we are permitted to, and intend to, rely on exemptions from certain disclosure requirements. For so long as we are an emerging growth company, we will not be required to:

• have an auditor report on our internal controls over financial reporting pursuant to Section 404(b) of the Sarbanes-Oxley Act;
• comply with any requirement that may be adopted by the Public Company Accounting Oversight Board regarding mandatory audit firm;
• rotate audit firms or provide a supplement to the auditor's report providing additional information about the audit and the financial statements (i.e., an auditor discussion and analysis);
• submit certain executive compensation matters to shareholder advisory votes, such as "say-on-pay" and "say-on- frequency"; and
• disclose certain executive compensation related items such as the correlation between executive compensation and performance and comparisons of the Chief Executive Officer's compensation to median employee compensation.

We will remain an "emerging growth company" until the earliest of (i) the last day of the first fiscal year in which our total annual gross revenues exceed $1.07 billion, (ii) the date that we become a "large accelerated filer" as defined in Rule 12b-2 under the Exchange Act, which would occur if the market value of our common shares that is held by non-affiliates exceeds $700 million as of the last business day of our most recently completed second fiscal quarter, (iii) the date on which we have issued more than $1 billion in non-convertible debt during the preceding three year period or (iv) the last day of the fiscal year in which we celebrate the fifth anniversary of our first sale of registered common equity securities pursuant to the Securities Act. Until such time, however, we cannot predict if investors will find our common shares less attractive because we may rely on these exemptions. If some investors find our common shares less attractive as a result, there may be a less active trading market for our common shares and our stock price may be more volatile.

It may be difficult to enforce judgments or bring actions outside the United States against us and our directors.

We are a British Columbia corporation and, as a result, it may be difficult or impossible for an investor to enforce in courts outside the United States judgments obtained in United States courts based upon the civil liability provisions of United States federal securities laws against these persons and the Company; or bring in courts outside the United States an original action to enforce liabilities based upon United States federal securities laws against these persons and the Company.

General Risk Factors

We heavily rely on management and key personnel and the loss of their services could have a material adverse effect on us.

Our success will be largely dependent upon the skills, experience and performance of our, and our subsidiaries', directors and officers and our ability to attract and retain key personnel. The loss of the services of these persons may have a material adverse effect on our business and prospects. We will compete with numerous other companies for the recruitment and retention of qualified employees and contractors. There is no assurance that we can maintain the service of our directors and officers. Failure to do so could have a material adverse effect on us and our prospects.

We are subject to risks arising from epidemic diseases, such as the COVID-19 pandemic.

In December 2019, COVID-19 emerged in Wuhan, China. Since then, it has spread to several other countries and infections have been reported around the world. On March 11, 2020, the World Health Organization declared the outbreak of COVID-19 a global pandemic. A public health epidemic, including COVID-19, or the fear of a potential pandemic, poses the risk that we or our employees, contractors, suppliers, and other partners may be prevented from conducting business activities for an indefinite period of time, including due to shutdowns or other preventative measures taken to limit the potential impact from a public health epidemic that may be requested or mandated by governmental authorities.

Our priorities during the COVID-19 pandemic are protecting the health and safety of our employees and our customers, following the recommended actions of government and health authorities. Our ability to continue to operate without any significant negative operational impact from the COVID-19 pandemic will in part depend on our ability to protect our employees and supply chain, as well as our continued operation in jurisdictions that currently or in the future impose restrictions on business operations.

Changes in U.S. economic conditions may negatively impact our business.

For the foreseeable future, our business is expected to be concentrated in the U.S. market. Changes in the economic conditions in the U.S. may have a substantial impact on our financial performance, business, financial condition or results of operations.

Changes in U.S. tax law may adversely affect us or our investors.

The rules dealing with U.S. federal, state and local income taxation are constantly under review by persons involved in the legislative process and by the IRS and the U.S. Treasury Department. Changes to tax laws (which changes may have retroactive application) could adversely affect us or holders of our common shares. In recent years, many changes have been made and changes are likely to continue to occur in the future.

For example, the Tax Cuts and Jobs Act enacted in 2017 made significant changes to corporate taxation, including the reduction of the corporate tax rate from a top marginal rate of 35% to a flat rate of 21%, which is a historically low rate. On March 27, 2020, the Coronavirus Aid, Relief, and Economic Security Act was enacted, which included certain changes in tax law intended to stimulate the U.S. economy in light of the COVID-19 pandemic, including temporary beneficial changes to the treatment of net operating losses, interest deductibility limitations and payroll tax matters. In light of the new presidential administration, it cannot be predicted whether, when, in what form, or with what effective dates, new tax laws may be enacted, or regulations and rulings may be enacted, promulgated or issued under existing or new tax laws, which could result in an increase in our or our investors' tax liability or require changes in the manner in which we operate in order to minimize or mitigate any adverse effects of changes in tax law or in the interpretation thereof.

As a Smaller Reporting Company as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item 1B.

ITEM 2. PROPERTIES.

Headquarters: Through our subsidiary Inspira Financial Company, we currently lease approximately 130 square feet of office space in Encino, California pursuant to a lease term of 6 months for an annual rental amount of $24,748 (US $19,752) with extension options of 6 months each. The base rental amount increases annually on a case-by-case basis.  The lease expires September 30, 2022, and we have an option to extend the lease for an additional 6 months at a monthly rental amount of $2,062 (US $1,646).

SDP facility lease: Through our subsidiary SDP, we lease approximately 77,000 square feet in Clear Lake, South Dakota pursuant to a lease agreement with an initial lease term of 15 years for a base annual rental of $230,533 (US$190,965), with four extension options of five years each.  The base rental amount increases annually on the first day of the lease year at the lesser of 2% or 1.25 times the change in the price index, as defined.  Per the lease agreement, the Company delivered a letter of credit in the amount of $484,975 (US$381,930), which is recorded in security deposit on the consolidated balance sheets.

Simbex office space lease:  Through our subsidiary Simbex, we lease approximately 10,548 square feet of office space in Lebanon, New Hampshire pursuant to a lease agreement with an initial lease term of 3 years for a base annual rental of $201,155 (US$157,440), with an option to extend for five years.  The base rental amount increases annually on the first day of the lease year at the lesser of 2% or 1.25 times the change in the price index, as defined. Per the lease agreement, the Company is also responsible to pay a prorated share of the building overhead monthly as additional rent. The annual amount for this additional rent is $119,350(US $93,413).

Mio-Guard, LLC facility lease.  Through our subsidiary Mio-Guard LLC, we lease approximately 18,414 square feet of office space in Holt, Michigan pursuant to a lease agreement with an initial lease term of 5 years for a base annual rental of $107,321 (US$85,656).

With respect to all of our facilities, we believe that equivalent suitable space is available at similar rents.

ITEM 3. LEGAL PROCEEDINGS

We are not currently a party to any pending legal proceedings that we believe will have a material adverse effect on our business or financial conditions. We may, however, be subject to various claims and legal actions arising in the ordinary course of business from time to time.

ITEM 4. MINE SAFETY DISCLOSURES.

Not applicable.

ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Price Information for our Common Shares

Our common shares have been traded on the TSXV under the symbol "SGMD" since December 15, 2020.  From January 15, 2020, through December 15, 2020, our common shares traded on the TSXV under the symbol "BRTL". ‎The TSXV is the only trading market for our common shares. The high and low sales prices for our common shares are as follows for the following periods as reported by the TSXV:

​

(1) Source: TMX Money

(2) Our common shares were halted from trading on the TSXV from September 9, 2020 until June 9, 2021 in connection with the completion of the Change of ‎Business.

Holders

As of May 20, 2022, we believe there were approximately 1,291 non-objecting beneficial owners of record holding 17,942,324 common shares of the Company. The number of non-objecting beneficial owners of record does not include an indeterminate number of shareholders whose shares are held by brokers in street name through depositaries, including CDS & Co and CEDE & Co.

The holders of our common shares are entitled to receive notice of and to attend and vote at all meetings of our shareholders and each common share shall confer the right to one vote in person or by proxy at all meetings of our shareholders.  The holders of our common shares shall be entitled, subject to the prior rights, if any, of any other class of our shares, to receive such dividends payable in cash or property as may be declared thereon by the Board from ‎time to time. The ‎Board may declare no ‎dividend payable in cash or property on our common shares unless the ‎Board ‎simultaneously declares a ‎dividend payable in cash or property on our Class A Shares, in an amount per Class A Share equal ‎to the amount of the dividend declared ‎per common share.‎ In the event of our liquidation, dissolution or winding-up, ‎whether voluntary or involuntary, the holders of our common shares are entitled to receive, subject to the prior rights, if any, of the holders ‎of any other class of our shares, our remaining property and assets pari passu with the holders of ‎our Class A Shares, ‎with the amount of such distribution per common share equal to the amount of such ‎‎distribution per Class A Shareholders of our common shares have no preemptive rights and no right to convert their common shares into any other securities. There are no redemption or sinking fund provisions applicable to our common shares.

Dividend Policy

We have never paid cash dividends on our securities, and we do not anticipate paying any cash dividends on our shares of common shares in the foreseeable future. We intend to retain any future earnings for reinvestment in our business. Any future determination to pay cash dividends will be at the discretion of our board of directors, and will be dependent upon our financial condition, results of operations, capital requirements and such other factors as our board of directors deems relevant.

Unregistered Sales of Securities

The following information represents securities sold by the Company within the past three years through May 23, 2022 which were not registered under the Securities Act. Included are new issues, securities issued in exchange for property, services or other securities, securities issued upon conversion from other share classes and new securities resulting from the modification of outstanding securities. We sold all of the securities listed below to accredited investors pursuant to the exemption from registration provided by Section 4(a)(2) of the Securities Act and Rule 506(b) of Regulation D promulgated under the Securities Act or pursuant to Regulation S promulgated under the Securities Act.

• On May 6, 2022 we issued 454,817 common shares pursuant to the exercise of broker warrants previously issued in connection with the Company’s financing completed on May 21, 2021.
• On February 15, 2022, we sold 7,749,000 common shares, and 7,749,000 warrants to purchase up to 7,749,000 common shares. Each common share and accompanying warrant were sold together as a "Unit" at a combined offering price of $0.55 per Unit, with an aggregate purchase price of approximately $4.26 million.  The warrants have an exercise price of $0.70 per share, are exercisable immediately and expire on February 15, 2025.  Beacon Securities Limited, Canaccord Genuity Corp., and Leede Jones Gable Inc. (collectively, the "Underwriters") acted underwriters for the offering and received commissions equal to $410,284  and were granted broker warrants to purchase up to an aggregate of 542,431 common shares of the Company. The broker warrants have an exercise price of $0.55 per share and are exercisable for a three-year period until February 15, 2025.
• On August 20, 2021, we issued 112,617 common shares pursuant to the exercise of stock options which generated net proceeds of $21,392.
• On May 20, 2021, we issued 1,492,425 common shares pursuant to the exercise of stock options which generated net proceeds of $355,500.
• On May 20, 2021, pursuant to a share exchange agreement, we issued 1,355,425 common shares in exchange for the surrender of 1,355,425 Class A shares.
• On May 21, 2021, we issued and sold 9,990,237 common shares which generated gross proceeds of $5,550,258. 7,869,005 of the common shares were sold at an approximate offering price of approximately $0.48 per share. 2,121,232 of the common shares and accompanying warrants were sold together as a "Unit" at a combined offering price of approximately $0.85 per Unit.  The 2,121,232 warrants have an exercise price of $1.25 per share, are exercisable immediately and expire on December 18, 2022.  Beacon Securities, and Leede Jones Gable Inc. (collectively, the "Underwriters") acted underwriters for the offering and received commissions equal to $249,768 and were granted broker warrants to purchase up to an aggregate of 1,119,906 common shares of the Company. 876,231 of the broker warrants have an approximate exercise price of $0.48 and 243,675 of the broker warrants have an approximate exercise price of $0.85 per share and are exercisable until December 18, 2022.
• On May 21, 2021, pursuant to a shares-for-debt agreement, we issued 737,000 common shares in satisfaction of $114,498 (US $88,000) of indebtedness owed to a service provider.

• On December 18, 2020, the Company completed a financing of 7,869,005 subscription receipts ("Salona Subscription Receipts") on a non-brokered private offering basis at a price of $0.48 per Salona Subscription Receipt, for ‎gross proceeds to us of $3,736,982 (the "Concurrent Salona Financing"). Each Salona Subscription Receipt automatically converted into ‎one common share on June 17, 2021. In connection with the Concurrent Salona Financing, registered dealers were entitled to cash ‎compensation in the aggregate amount of $166,448‎, and (ii) on the Escrow Release Date, an aggregate of 876,231 options to purchase one ‎common share at ‎a price of $0.48 per common share until December 18, 2022.
• On December 18, 2020, our wholly owned British Columbia incorporated subsidiary ("Finco") completed a financing of 2,121,232 subscription receipts ("Finco Subscription Receipts") on a non-brokered private offering basis, at a price of $0.85 ‎per Finco Subscription Receipt, for gross proceeds to Finco of $1,813,276 (the "Concurrent Finco Financing"). ‎Each Finco Subscription Receipt automatically converted into one unit (each, a "Unit") on the Escrow Release Date, without any further consideration on the part of the subscriber. Each Unit ‎consisted of one share of Finco (a "Finco Share") and one Finco Share purchase warrant (a "Finco Warrant"), with ‎each Finco Warrant exercisable for one Finco Share at $1.25 per share until December 18, 2022, subject to acceleration. In connection with the Concurrent Finco Financing, ‎registered dealers were entitled to (i) cash ‎compensation in the aggregate amount of $83,320‎, and (ii) on the Escrow Release Date, an aggregate of 243,675 options to purchase one Finco Share at a price of $0.85 per share until December 18, 2022.

ITEM 6. SELECTED FINANCIAL DATA

As a Smaller Reporting Company as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item 6.

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

Except for the historical information contained herein, the following discussion contains forward-looking statements that are subject to known and unknown risks, uncertainties and other factors that may cause our actual results to differ materially from those expressed or implied by such forward-looking statements. We discuss such risks, uncertainties and other factors throughout this Annual Report and specifically under the captions "Risk Factors". In addition, the following discussion and analysis should be read in conjunction with the 2022 Consolidated Financial Statements and the related Notes to the Consolidated Financial Statements included elsewhere in this Annual Report.

NON-GAAP MEASURES

Throughout this management discussion and analysis, our management uses a number of financial measures to assess its performance, and these are intended to provide additional information to investors concerning the Company. This year and 2022 mean the fiscal year ended February 28, 2022. Last year and 2021 mean the fiscal year ended February 28, 2021. Some of these measures, including net profit (loss) from operations and Adjusted EBITDA (i) are not calculated in accordance with Generally Accepted Accounting Principles (GAAP), which are based on the United States Generally Accepted Accounting Principles (U.S. GAAP), (ii) are not defined by GAAP, and (iii) do not have standardized meanings that would ensure consistency and comparability between companies using these measures. Readers are cautioned that the disclosure of these items is meant to add to, and not replace, the discussion of financial results as determined in accordance with U.S. GAAP. Salona's presentation of this financial measure may not be comparable to similarly titled measures used by other companies The primary purpose of these non-GAAP measures is to provide supplemental information that may prove useful to investors who wish to consider the impact of certain non-cash or uncontrollable items on our operating performance and who wish to separate revenues and related costs associated with client acquisition that may not be ongoing.

OVERVIEW

On March 11, 2021, we completed the Change of Business, as defined by the TSX Venture Exchange, to become an acquisition-oriented medical device company with plans to achieve scale through further acquisitions and organic growth. We presently intend to operate in the recovery science market, including postoperative pain, wound care and other markets serving the aging population in the United States.

On May 21, 2021, we consummated the acquisition of South Dakota Partners Inc. ("SDP") through a subsidiary. SDP operates a large state-of-the-art production facility located in the State of South Dakota currently producing proprietary and white label medical devices for pain management, cold and hot therapy, NMES, PEMF and ultrasound. Since its acquisition, SDP has generated $12,515,063 of revenue and has generated net earnings of $392,673. We anticipate SDP will continue to be profitable in the future. Information relating to SDP contained in this Report covers the period from May 21, 2021, through February 28, 2022.

On September 30, 2021, the Company consummated the acquisition of Simbex, LLC ("Simbex"), an IP-based business that has a portfolio of several revenue and royalty generating products ranging from wearable technology to products for physical stability as well as expertise in development and design of many medical devices on the market it has innovated over the past several years.  Simbex generated over $8,000,000 in audited revenues in 2020 with reported gross margins of 50% and was cash flow positive. Information relating to Simbex contained in this Report covers the period from September 30, 2021, through February 28, 2022. Since acquisition, Simbex has generated $4,653,516 of revenue and has generated net earnings of $685,601.

On November 28, 2021, the Company consummated the acquisition of the customer lists, sales orders and supply agreements, and related sales channel and intellectual property assets of ALG-Health, LLC ("ALG"), a business engaged in the selling medical devices and supplies to small, independent hospitals, group purchasing organizations, medical offices and clinics, in exchange for non-voting securities of ALG Health Plus which are exchangeable for up to a maximum of 21,000,000 nonvoting Class A shares of the Company subject to the achievement of certain revenue and EBITDA targets. In connection with the transaction, our subsidiary ALG Health Plus entered into an exclusive supply agreement with ALG.

January 12, 2022, Melissa Polesky-Meyrowitz, CPA, was appointed the Chief Financial Officer for the Company. Mrs. Polesky-Meyrowitz is a CPA with a BBA in accounting from Hofstra University. She has over ten years' experience in accounting and taxation. She was previously an International Tax Services Supervisor at RSM, LLP and an US Tax Compliance and Advisory Manager at Richter LLP located in Toronto. Melissa has previously worked with the Company in the role of senior controller.

On March 11, 2022, the Company acquired Mio-Guard LLC, a Michigan based company engaged in the wholesale sale of sports medicine products in the mid-western, southern and central United States, through a wholly owned subsidiary. Mio-Guard and its predecessors had 2021 unaudited annual revenues of approximately $4.5M (US$3.6M) with 25% gross margins. Since 2009, the team at Mio-Guard has sold into the athletic training, physical therapy and orthopedics markets for sports medicine products. Mio-Guard has over 50 sales representatives in the United States with a focus on the Midwest, South and Central United States and long-standing relationships with institutions ranging from high school to college to professional athletics. Financial information related to Mio-Guard is not covered in this report.

SELECTED FINANCIAL INFORMATION

The Company uses Adjusted EBITDA, as calculated below, to assess the financial health of its acquisitions and determine the overall potential of its business not including transaction costs and other activities associated with the ongoing growth strategy of the Company. Adjusted EBITDA is calculated as net loss less interest, taxes, depreciation, amortization, stock-based compensation, foreign exchange gain, change in fair value of contingent consideration, provision for impairment and transaction costs.

Revenues

Adjusted EBITDA

Adjusted EBITDA is calculated as follows:

RESULTS OF OPERATIONS`

Revenues

Since the acquisition of SDP on May 21, 2021, Simbex on September 30, 2021, and the sales channel assets of ALG on November 28, 2021, we have continued generating sales revenue in line with each of their pre-COVID revenue figures and each continue to grow. From March 1, 2021, through February 28, 2022, we generated sales of $18,312,269.

Cost of revenue includes our labor costs expended in the production of medical devices, and related expenses allocated directly to the production of medical devices, and our cost of actual materials used in the production process from May 21, 2021, through February 28, 2022. The ongoing issues with the global supply chain process caused by COVID-19 and other economic factors has impacted the Company's ability to source affordable components. While there can be no assurances, management believes that the negative impacts on the Company's sourcing of components will diminish as the global supply chain stabilizes.

Amortization, Depreciation, Interest, Transaction Costs and Foreign Exchange Gain

Amortization of intangible assets reflects the amortization of intangible assets such as trademarks, non-compete agreement, intellectual property and customer base. We depreciate property and equipment across their useful lives. While there can be no assurances, we expect depreciation of property and equipment and of right of use asset and interest expense to increase as the Company continues to grow its balance sheet through acquisitions.

Transaction costs include legal, financial, audit, US and Canadian regulatory expenses and other fees incurred in connection with the Change of Business transaction, the SDP, Simbex and ALG acquisitions, due diligence of acquisition targets, financing costs, US regulatory costs, and associated accounting and other costs. While these costs are necessary to the change of our line of business, they are not operational expenses of the business.

Since we operate in the United States, we are exposed to foreign currency risk. We are unable to effectively predict swings in the foreign exchange value of the U.S. Dollar against the Canadian Dollar. When currency is moved between denominations, a gain or loss may be realized which management is unable to accurately predict.

Liquidity and Capital Resources

We fund our operations through cash from operations and asset-based loans secured by subsidiary inventory and accounts receivable from third parties. As of February 28, 2022, we had $8,057,100 of cash and cash equivalents, total restricted cash and marketable securities, which was a decrease of $4,937,726 from the balance as of February 28, 2021. During the quarter ended May 31, 2021, we generated $5,550,258 from the closing of the sale of 9,990,237 of our common shares and 2,121,232 warrants. On August 20, 2021, we generated $21,392 from the exercise of 112,617 of stock options. On February 15, 2022, we generated $4,261,950 from the issuance of 7,749,000 of our common shares and 7,749,000 warrants.

Long Term Debt

On June 9, 2021, our subsidiary SDP entered into a $6,813,180 (US$5,400,000) revolving loan facility with a third-party financial institution, which refinanced their existing revolving loan facility and other notes.  All amounts outstanding under the $6,813,180 revolving loan facility bear interest at the greater of 4% or prime plus 0.75% per annum, and any accrued unpaid interest is payable monthly, with a maturity of August 1, 2023. The repayment obligations under the $6,813,180 facility are secured by a first priority lien on substantially all of the assets of SDP and are not guaranteed by the Company or any other subsidiary. In addition, on June 9, 2021, SDP issued a secured promissory note in the principal amount of $936,896 (US$750,000) which evidenced the refinancing of two outstanding loans. The note bears interest at the greater of 6% or prime rate plus 2.75% per annum. Principal and accrued but unpaid interest due on the note are payable monthly in equal installments over a 36-month period, and the repayment obligations under the note are secured by a lien on substantially all of the assets of SDP. As of February 28, 2022, we had long term debt of $856,119 related to the above note, as compared to $0 on February 28, 2021.

Cash Flows

The following table is a summary of our cash flows for the years ended February 28, 2022, and February 28, 2021:

Net Cash Used in Operating Activities

During the year-ended February 28, 2022, $3,703,879 was used in operating activities, compared to $975,174 for the year-ended February 28, 2021. This cash flow was mostly used to ensure continued operation of the Company and capital raising expenses.

During the year-ended February 28, 2022, $4,617,540 was used in investing activities, compared to $74,870 that was provided for the year-ended February 28, 2021. This decrease in cash flow reflects the funds used to acquire Simbex on September 30, 2021. Net cash used for investing activities was offset by cash received upon the acquisition of SDP and Simbex.

Net Cash Provided by Financing Activities

During the year-ended February 28, 2022, $3,935,155 was received from financing activities, compared to $5,430,722 during the year-ended February 28, 2021. The cash was primarily received from the issuance of 7,749,000 shares and 7,749,000 share purchase warrants for proceeds of $4,261,950 in February 2022. Additionally, $376,893 was received from the exercise of stock options.  Cash was primarily used to pay off loans held by SDP and for share issuance costs.

The Company currently intends to satisfy its short- and long-term liquidity requirements through its existing cash, current assets and cash flow from operating activities.

We have never paid a cash dividend on our capital stock. Any future determination to pay cash dividends will be at the discretion of our Board of Directors (the "Board") and will depend upon our financial condition, operating results, capital requirements and such other factors as our Board deems relevant.

Off-Balance Sheet Arrangements

We did not have any off-balance sheet arrangements during the periods covered by this Report.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Market risk is the potential economic loss arising from adverse changes in market rates and prices, such as interest rates, foreign exchange rates, raw material and other commodity prices.

Currency Risk. Our operating results and financial position are reported in Canadian dollars. Some of our financial transactions are denominated in the U.S. dollar.  The results of our operations are subject to currency transaction risks. We have no hedging agreements in place with respect to foreign exchange rates.  We have not entered into any agreements or purchased any instruments to hedge possible currency risks at this time.

Interest Rate Risk. Interest rate risk is the risk that the fair value or future cash flows of a financial instrument will fluctuate because of changes in market interest rates. Cash and cash equivalents bear interest at market rates.  As at February 28, 2022, our cash and cash equivalents consisted of $8,057,100, as compared to $7,080,768 at February 28, 2021. Our financial debts have variable fixed rates of interest and as a result, the Company is exposed to interest rate risk on the line of credit ($5,497,249) short term debt ($174,361) and long-term debt ($681,758) which could negatively impact the Company's cash position and result of operations in future periods should interest rates rise.

SALONA GLOBAL MEDICAL DEVICE CORPORATION

Consolidated Financial Statements

Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and Board of Directors of Salona Global Medical Device Corporation

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheets of Salona Global Medical Device Corporation and its subsidiaries (the "Company") as of February 28, 2022 and 2021, the related consolidated statements of operations and comprehensive loss, stockholders' equity, and cash flows for each of the two years in the period ended February 28, 2022, and the related notes (collectively referred to as the "consolidated financial statements"). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of February 28, 2022 and 2021, and the results of its operations and its cash flows for each of the two years in the period ended February 28, 2022, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.